GBOX tipy, problemy, skusenosti

[gorannic]

zdravim, chel by som tu oslovit ludi co pouzivaju gbox. Nahodil som si ho a IpBoxe 250, uz starsie servre co som pouzival na karte sky star 2 asi pol roka, a odrazu jak som to hodil do IpBoxu fungovali cca 3dni a potom si ma postupne zmazali, kuva cim to moze byt ??

Poradte dake dobre pluginy , da sa na IpBOxe rozchodit aj take nieco ako Vplug ?
POtreboval by som daky dobry dline, ak by ste dakdo chceli vymenit kontaktujte ma. A kto pouziva gbox popiste dake vychytavky pls, a co je vlastne lepsie gbox alebo newcam ?? Alebo co je najlepsie..

[gorannic]

pouzivate tu niekto GBOX ? alebo je nejaky lepsi emu ?
ja som s nim celkom spokojny ale sem tam zamrzne kanal...

[revis]

pouzivate tu niekto GBOX ? alebo je nejaky lepsi emu ?
ja som s nim celkom spokojny ale sem tam zamrzne kanal...

Minimalne jeden urcite - macal. Skus ho oslovit -ked dojde.

[gorannic]

Ak chcete niekto, mozme vymenit dline , poslite mi PM.
i am 24/7 online
dist 1: 10
dist 2: 250
poslite mi PM

[Ranma12]

To lze sdileni dale vest, myslim tim byt "prostrednikem"? Jak se to dela?

[gorannic]

To lze sdileni dale vest, myslim tim byt "prostrednikem"? Jak se to dela?

jasne sak o tom to je: ty posles niekomu svoju dline a niekto tebe, tym padov ziskas jeho carty a tie mozes zas ponutnu niekomu dalsiemu, a tyk vymienas a vymienas a hladas novych a lepsich peerov

[dvbs]

A ako ten gbox vypnem, ked mi to v CB 400HD cez web menu nejde vypnut ?

[galjo]

V Ab IPBoxe 200S to vypnem v AIO paneli.

[vochomurka]

byl by tady nekdo ze "starsich" uzivatelu fora ochoten popsat gbox protocol?

predem dekuji

[davidas]

na netu vyhledano, treba pomuze, nemam vyzkousene....
mezi posty byl i uzivatel enosat, tak treba neco prida, nebo pomuze....

################################################## ###
Tady mas popis v cestine:
gbox_cfg
quote:
________________________________________
#gbox configuracni slozka

# sledovat/proskoumat
# xx yz ; xx=00 bez vystupu na konsolu
# xx yz ; xx=01 vystup konsoly
# xx yz ; y=0 kontrola vystupu(nepouzivat)
# xx yz ; y=1 nekontrolovat vystup
# xx yz ; z=0 vystup na konsolu
# xx yz ; z=1 vystup zapsat do /var/tmp/debug.txt
# xx yz ; z=2 vystup zapsat do UDP (k jisteni s gboxu)
Z: { 01 01 } 192.168.1.200 8024

# Druh ukolu
# 00 ** normalni rezim gboxu (bez season, misto neho pouzit Multicam)
# 01 ** Season Emulace v Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulace v Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulace v Irdeto allcam chid 1702 Z
# 12 ** Season Emulace v Irdeto allcam chid 1722 Z
# 13 ** Season Emulace v Irdeto allcam chid 1762 Z
# ** *1 Com port pouzit pro season emulace (1 or 2)
# ** 0* pouzit CTS pro RST detekci
# ** 1* pouzit DCD pro RST detekci
# ** ** 9600 = pouzit Baudrate (pracuje pouze v dbox2)
#W: { 00 00 } 9600

#gbox rezim
# 00 pouze Emu
# 01 pouze SoftCam (kdyz jsou karty ve slotech), Emu (kdyz je bez karet)
# 02 pouze Net Client
# 03 smiseny rezim !!!!! toto pouzivat !!!!!
G: { 03 }

# Znazornrni ECM v konzoli
# 00 neznazornovat ECM┤s
# 01 znazornovat pouze platne ECM┤s
# 02 znazornovat platne i neplatne ECM┤s with complete data display
C: { 01 }

# Znazorneni EMM v konzoli
# 00 neznazornovat EMM┤s
# 01 znazornovat pouze platne EMM┤s
# 02 znazornovat platne i neplatne EMM┤komplet
# 1* vsechny mozne poradi kart PW-Nagra-17xx into /var/keys/pwupdate.log
M: { 01 }

# AutoUpdate
# 00 vypnuto
# 01 zapnuto AU
# 02 Auto AU !!!!! toto pouzivat !!!!!
A: { 02 }

# Key update
# 01 update pouze nove klice, default setting
# 02 update vsech klicu (pro platne PMK controla)
U: { 01 }

# Hash pidu
# 00 hash vsech pidu, NEPOUZIVAT TUTO FUNKCI POUZEPRO TESTOVANI!!!
# 01 hash pouze pidy s implemented algos and available keys !!!!! always use this
H: { 01 }

# Slozka klicu se nachazi v
# 00 klice ve /var/keys
# 01 klice ve /var/tmp
T: { 00 }

# Pro znazornrni multicamu na obrazovce z portu com1/com2
# 00 vypnuto)
# 01 znazorneni Smartcard v Neutrinu
# 02 znazornrni Smartcard v Neutrino novy nhttpd format
# 03 znazorneni in Enigma
O: { 00 } 192.168.1.200

# Logger a sitovy modus UDP port nastaveni
# 00 neni otevren UDP port
# 01 pri otevreni UDP portu pro IP, UDP
L: { 00 } 192.168.1.200 8017

# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CW┤s, 00 is the
recommended mode ! No drivers are required) use
D* ** pouzivat pouze pri problemech
0* ** DOPORUCENE NASTAVENI !!!
# F* ** ; write CW┤s in both devices (pouze pro PVR v STB04xxx devices)
# ** y* ; y=0001b (0x1*) pro slot1 jako Multicam (jen pro STB04xxx)
# ** y* ; y=0010b (0x2*) pro slot2 as Multicam (jen proSTB04xxx)
# ** y* ; y=0011b (0x3*) pro slot1 a slot2 jako Multicams (jen pro STB04xxx)
# ** *z ; z=0001b (0x*1) pro com1 jako Multicam
# ** *z ; z=0010b (0x*2) pro com2 jako Multicam
# ** *z ; z=0011b (0x*3) pro com1 a com2 jako Multicams
# ** yz ; yz=00110011b (0x33) pro slot1+slot2+com1+com2 jako Multicams
# ** *z ; z=0100b (0x*4) zmena CTS detekce na com1
# ** *z ; z=1000b (0x*8) zmena CTS detekce na com2
# priklad: yz = 0x0A = 00001010 (pro com2 se zmenou CTS detekcni linky)
V: { F0 30 }

# ==================================================
===========================
# zvlastni nastaveni pri problemech, jinak neni potreba nastavovat #
# cpu, api, cw zapisovaci metoda
#
# 00 auto
# 01 80X86
# 02 MPC823
# 03 IBM STB04xxx
# 00 auto
# 01 ibm
# 02 api2
# 03 api3
# 00 cw pise styl = use internal routine (jen dbox2)
# 01 cw pise styl = CA_SET_DESCR type1 (dbox2, vdr)
# 02 cw pise styl = CA_SET_DESCR type2
# 03 cw pise styl = CA_SET_DESCR type3
# 04 cw pise styl = 16 byte /proc/bus/gtx
# 05 cw pise styl = 4096 byte /proc/bus/gtx, cw offset=0x04D0
# xx pise cw in 1st device with index=xx
# yy pise cw v 2nd device s index=yy
# 01 pro .index=0 (default)
# 02 pro .index=1
# 03 pro .index=0 and .index=1
# .. bitove kombinace ...
# FF pro vsech 8 indexu (0-7)
#J: { 01 00 00 01 01 }

# Klice, slozky,vysvetlivky
#
#F: { 01 } /var/tmp/pmt.tmp // pmt slozka
#F: { 02 } /var/tmp/emm.info // informace o updat klicu
#F: { 03 } /var/tmp/ecm.info // ecm info soubor
#F: { 04 } /var/tmp/atack.txt // informace o sitovych utocich
#F: { 11 } /var/keys // slozka pro konfiguracni soubory
#F: { 12 } /var/tmp // slozka pro temporary soubory
#F: { 13 } /var/tmp // slozka na keyfiles
#F: { 21 } /dev/dvb/adapter0/ca0 // ca zarizeni
#F: { 22 } /dev/dvb/adapter0/dvr0 // dvr zarizeni
#F: { 23 } /dev/dvb/adapter0/demux0 // demux device
#F: { 31 } /dev/dvb/adapter0/ca1 // secundarni ca zarizeni k psani cw's (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot1
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2

# Pro taktovaci freaks:
# Vnitrni frekvence STB04xxx slotu s:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto pracuje s 7.8MHz, vsechny ostatni 6.30MHz nebo 5.25MHz
# Dreambox nema stabilni taktovaci signal, proto nektere citlive karty pracuji dokonce s # 3.5MHz, kvuli tohoje tato moznost tady.
# V jinych STB04xxx prijimacich funguji stejne karty na 6,30MHz.
#
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
#F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
F: { 58 } 02 // nds



# F: { 21 } /dev/dvb/adapter0/ca0 // ca device
# F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device
# F: { 23 } /dev/dvb/adapter0/demux0 // demux device
# F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw's (recording)

stare jadro pouzivalo device 0 , nove device 3

[EnoSat]

no neviem ci popis protokolu sa rovna popisu nastavenia prace interneho readera

[davidas]

...tak pochopil jsem, ze chce popis .cfg, jak jsem napsal, nemam vyzkousene, tak treba prispeje nekdo dalsi, zkusim jeste pohledat jak bude cas....


1. Get the files
2. Put the files in the right folders
3. Make the needed configuration
4. add and exchange dlines
5. control your gbox
6. possible errors and reasons

1. First download all files from the following link
Gbox2.1b

2.Extract the files and you will see also the path where the files should be put
//var/bin => gbox
//var/keys => cwshare.cfg,gbox.cfg,softcam.cfg
//var/script => gbox_cam.sh
//var/tuxbox/plugins => egboxcenter.cfg,egboxcenter.so,gboxsuite.cfg, egboxsuite.so, gbv.cfg,gbv.ident,gbv.so

Use a Ftp program to put the files in the folders. I prefer flashfxp. After you had put the files in the folders. Make CHMOD changes for the following files. You can make the CHMOD changes by using the right mouse button (FLASHFXP) on the file and selecting Attribute (CHMOD).
//var/bin/gbox => CHMOD 755
//var/keys => cwshare.cfg => 644
//var/keys => gbox_cfg => 644
//var/scripts => gbox_cam.sh => 755

3. Coniguration

You must made only individual changes to cwshare.cfg and gbox_cfg

CWSHARE:

This file is responsbile for communication between the peers.
Following lines should be inside this files
M: => Adress of your gbox
I: => Configuration about till which distance cards you allows to get
X: => Configuration abotu how many of the same card you allows to get
D: => Communication line between the peers
N: =>
W: =>

How should the lines be set:

M-LIne

M: { your.dyndns.org { Password }}
=> Password: You can only use 0-9 and A-F for setting password. My suggestion is don't use a very very easy password like 12345678 or AABBCCDD or ABCD1234, so a lot of people makes that and this can be a reason for an error, if you start the gbox. More details at the end.

I-Line

I: { 03 }
This is the selected value most gbox user set for their I-Line. Because with this configuration you only accept cards till Dist3. Cards with Dist4 and Dist5 are not good for sharing and gettings keys. If you have later more peers you can set the value to 02.

X-Line

X: { 10 }
This is a value should experiment a little bit which value is the best for your gbox server. As you know with this value you set a limit to the number of same cards. 0A, 10, 08 this are the most used values.

N-Line

N: { 00 01 03 3F 4000 6000 }
I will write more details to this line. Use the N-Line given above ( its my N-Line)

W-Line

W: { 01 01 01 } 1FFF
I will write more details to this line. Use the N-Line given above ( its my N-Line)

D-Line

This is the most importan Line

D: { other.dyndns.org { Port1 Port2 { Password { A5 A5 }}}}

other.dyndns.org => the dyndns of your share peer
port1 => your port number using for gbox
port2 => port number of you peer
Password => password of your peer
A5 A5 => Share Level for Local and Virtual Cards

You will get this dline every time for your peer. So the only thing you had to do is, to put your port number instead of port1 and add it in your cwshare.cfg. The Dline you give to your peer is the the same but with your dyndns, password and your port number is port2.

D: { own.dyndns.org { Port1 ownport { own password { A5 A5 }


GBOX_CFG

In your gbox_cfg file you have following lines

Z: { 01 12 } dream ip 8024
G: { 03 }
C: { 01 }
M: { 01 }
A: { 00 }
U: { 01 }
H: { 01 }
T: { 00 }
O: { 03 } dream ip
L: { 00 } dream ip 8029
W: { 00 00 } 9600
V: { F0 35 } => configurations for reading slot and com-ports

V: { F0 00 } nothing
V: { F0 10 } slot 1
V: { F0 20 } slot 2
V: { F0 30 } both slots
V: { F0 35 } both slots + com ports
V: { F0 05 } only com ports
V: { F0 31 } Sc8in1
V: { 00 05 } Dbox2 multicam

I will made later a detailed description for this file. The informations above are taken from my gbox_cfg


4. Add and exchange Dlines

After ending configuration you can now exchange dlines

M: { own.dyndns.org { password }}
# Internet Friends port range password cod
I: { 2 }

X: { 0A }
N: { 00 01 03 3F 4000 6000 }
W: { 01 01 01 } 1FFF
D: { other.dyndns.org { yourport otherport { otherpassword { A5 A5 }}}}

Be carefull if you add dlines it must the same like above. No more spaces or less spaces



5. Control Gbox and peers

Gbox Center and Gbox Suite are plugins to have Informations about your peers, Cards, Distance and Level Share and how many cards do you have for each provider
You can access to this plugins
Blue Panel => Plugins => Gbox Center or Gbox Suite


6. Error and Reasons

If your gbox is not working ( you will see it if you go to: Blue Panel => Plugins => Gbox Center => Gbox Share Center => Peer Status => Message that share is not found, check if gbox is running )
Then check following
1. Internet Connection
2. Correct format of dlines ( Spaces, password (0-9,A-F) )
3. Passwords of the dline ( so if two peers use the same password they will get the same Box ID and two same Box ID in one Gbox Server is not working)
4. Some Cards needs special configuration to share them ( Sky Uk, Nova etc)

[9000peter]

Nechcem zakladať novú tému ale chcem sa spýtať existuje nejaký webif pre g-box tak ako to je v oscame kontrola zápisov a podobne. Z g-boxu info viem akurát tak toto. Ďakujem.

[EnoSat]

Nechcem zakladať novú tému ale chcem sa spýtať existuje nejaký webif pre g-box tak ako to je v oscame kontrola zápisov a podobne. Z g-boxu info viem akurát tak toto. Ďakujem.

webif nie , ale mas plugin alebo appky v PC

[kovsoft]

nejaký control center atď..dreamcs...alebo nejaký suite...atd atd..
P.S. do google a najde to.. ehm dnes už nikto neporadí len tak
.. že kua som bol drbaný za to a natrápil som sa.. uff.

[9000peter]

Nechcem zakladať novú tému ale chcem sa spýtať existuje nejaký webif pre g-box tak ako to je v oscame kontrola zápisov a podobne. Z g-boxu info viem akurát tak toto. Ďakujem.

webif nie , ale mas plugin alebo appky v PC

Názov pluginu alebo appky poprípade kde to stiahnem....Ď.

[EnoSat]

Nechcem zakladať novú tému ale chcem sa spýtať existuje nejaký webif pre g-box tak ako to je v oscame kontrola zápisov a podobne. Z g-boxu info viem akurát tak toto. Ďakujem.

webif nie , ale mas plugin alebo appky v PC

Názov pluginu alebo appky poprípade kde to stiahnem....Ď.

gboxsuite.jpg

[EnoSat]

-prepnutie ICE do IRD v 811

softcam.cfg

Kód: Vybrat vše

(default: 0) enable/disable irdeto cryptoworks enveloped support
enable_ice = 0 ; ICE ako 0D96/0D97/0D95
enable_ice = 1 ; ICE ako 0624/0653/0640

[5970]

-prepnutie ICE do IRD v 811

softcam.cfg

Kód: Vybrat vše

(default: 0) enable/disable irdeto cryptoworks enveloped support
enable_ice = 0 ; ICE ako 0D96/0D97/0D95
enable_ice = 1 ; ICE ako 0624/0653/0640

Prosím o radu, mám VU+Solo 4k, openpli 6.2. V uničtečkách mám skylink CZ a SK kartu. Jde mi jen slot 1. Co je třeba ještě nastavit, aby šel i druhý slot. Děkuji

[EnoSat]

opet problem citat popis konfiguraku ?

Kód: Vybrat vše

# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations (in the dbox2 the gbox writes directly the CW´s, 00 is the recommended mode ! No drivers are required) use D* ** ONLY if you have Problems. 0* ** should be prefered !!!
# F* ** ; write CW´s in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
# V: {00 31} the 2 internal reader + an external reader SC8in1, MCR and 4in1 8in1 addressed
# V: {00 35} the 2 internal reader + an 1 external reader such Smargo, Easy Mouse, Multiprog, Multi Mouse inverted addressed
# V: {00 3F} the 2 internal reader + an USB HUB + 2 Smargos addressed
V: { 00 30 }