Raspberry + oscam
-
alfsvk
Re: Raspberry PI model B (oscam?)
Teraz som stiahol oscam /9810/ pre raspberry a skusil ho na banana, ziadny podstatny rozdiel oproti mojej kompilacii priamo na banana som nespozoroval.
Re: Raspberry PI model B (oscam?)
Mam na mysli aky mate Operacny system? Davam tam Raspbian_For_BananaPi_v3.0
-
Pr0metheUs
- Pokročilý
- Příspěvky: 195
- Registrován: 27.prosinec 2008 - 18:34
- satelitni prijimac: VU+
Re: Raspberry PI model B (oscam?)
Ano ten.
Re: Raspberry PI model B (oscam?)
Chyba bola v tom ze som mal v "Cs357x" inu Ip-čku ako je Ip servra bananapi.Dakujem vsetkym co ma nakopli.Ide to ako pila.
-
Pr0metheUs
- Pokročilý
- Příspěvky: 195
- Registrován: 27.prosinec 2008 - 18:34
- satelitni prijimac: VU+
-
Pr0metheUs
- Pokročilý
- Příspěvky: 195
- Registrován: 27.prosinec 2008 - 18:34
- satelitni prijimac: VU+
Re: Banana Pi
oscam-svn9842-BananaPi SSL
oscam-svn9842-BananaPi
oscam-svn9842-BananaPi
Nemáte oprávnění prohlížet přiložené soubory.
-
Pr0metheUs
- Pokročilý
- Příspěvky: 195
- Registrován: 27.prosinec 2008 - 18:34
- satelitni prijimac: VU+
Re: Banana Pi
Raspbian_For_BananaPi_v3.1
Version: 3.1
Release date: 2014-08-12
Default login: bananapi/bananapi & root/bananapi
Kernel version: 3.4.90
The latest Raspbian 3.1 for Banana Pi. This version is based on Rapbian 3.0. It use the same kernel with other latest OS. The wiringPi in this version worked very well. Please enjoy it. We have send to some users for testing before releasing. Any problem you can post it here.
Release Note:
> Based on the Raspbian 3.0;
> Updated all software to the latest version;
> Reduce the dram frequency to 432 to get more stable;
> Changed the default user pi to bananapi, now the login account is bananapi/bananapi or root/bananapi ;
> Modified some scripts to make it work with account bananapi, such as scratchgpio5, raspi-config and so on;
> Updated the wiringPi to latest beta version, all functions work well, such spi, i2c , pwm and so on; And the modified wiringPi can also worked on Raspberry Pi;
> Enable the cpu temperture, you can got it at /sys/devices/platform/sunxi-i2c.0/i2c-0/0-0034, and cat temp1_input ;> Fix the problem with 8192cu driver from kernel, removed the 8192 blacklist from /etc/modprobe.d ;
> Modified the fex file to make it more stable on Banana Pi;
> This version still can work on Raspberry Pi (Only test on Raspberry Pi B+);
Download
Version: 3.1
Release date: 2014-08-12
Default login: bananapi/bananapi & root/bananapi
Kernel version: 3.4.90
The latest Raspbian 3.1 for Banana Pi. This version is based on Rapbian 3.0. It use the same kernel with other latest OS. The wiringPi in this version worked very well. Please enjoy it. We have send to some users for testing before releasing. Any problem you can post it here.
Release Note:
> Based on the Raspbian 3.0;
> Updated all software to the latest version;
> Reduce the dram frequency to 432 to get more stable;
> Changed the default user pi to bananapi, now the login account is bananapi/bananapi or root/bananapi ;
> Modified some scripts to make it work with account bananapi, such as scratchgpio5, raspi-config and so on;
> Updated the wiringPi to latest beta version, all functions work well, such spi, i2c , pwm and so on; And the modified wiringPi can also worked on Raspberry Pi;
> Enable the cpu temperture, you can got it at /sys/devices/platform/sunxi-i2c.0/i2c-0/0-0034, and cat temp1_input ;> Fix the problem with 8192cu driver from kernel, removed the 8192 blacklist from /etc/modprobe.d ;
> Modified the fex file to make it more stable on Banana Pi;
> This version still can work on Raspberry Pi (Only test on Raspberry Pi B+);
Download
-
Aladinluky
- Registrovaný
- Příspěvky: 9
- Registrován: 20.březen 2009 - 13:32
- satelitni prijimac: Vu+ Zero , Vu+ Zero 4K
Re: Raspberry PI model B (oscam?)
Hotová kompilácia Oscam 1.20 9842
+ config
stací len nahrať do Raspberry.
+ config
stací len nahrať do Raspberry.
Naposledy upravil(a) Aladinluky dne 14.říjen 2014 - 15:02, celkem upraveno 3 x.
VU+ Zero + VTI 14.0.6 + Oscam 1.20 svn 11572
Vu+ Zero 4K + VTI 14.0.6 + Oscam 1.20 svn 11572
Skystar HD 2 + DVB Viewer pro 5.6.2 + Acamd + vplug + nwemu
Raspberry pi 3 B+ - Oscam + Argolis Smargo Smartreader +V2
Raspberry pi 4 B
Vu+ Zero 4K + VTI 14.0.6 + Oscam 1.20 svn 11572
Skystar HD 2 + DVB Viewer pro 5.6.2 + Acamd + vplug + nwemu
Raspberry pi 3 B+ - Oscam + Argolis Smargo Smartreader +V2
Raspberry pi 4 B
Re: Banana Pi
Adobe flash v prehliadaci chromium, komu chyba...
Plnohodnotne a celkom "rychlo" ide len v prehliadaci chromium.
sudo apt-get update
sudo apt-get install chromium
Potom nakopirovat tieto dva subory ako root:
libpepflashplayer.so do /usr/lib/chromium/plugins
default do /etc/chromium
Plnohodnotne a celkom "rychlo" ide len v prehliadaci chromium.
sudo apt-get update
sudo apt-get install chromium
Potom nakopirovat tieto dva subory ako root:
libpepflashplayer.so do /usr/lib/chromium/plugins
default do /etc/chromium
Nemáte oprávnění prohlížet přiložené soubory.
Na otazky pouzivajte forum a nie SS !!!
AMIKO VIPER SLIM, IPBOX9000, ABIpbox Prismcube Ruby, Multibeam 85, 23,5E-19,2E-13E-1W, SG-2100
AMIKO VIPER SLIM, IPBOX9000, ABIpbox Prismcube Ruby, Multibeam 85, 23,5E-19,2E-13E-1W, SG-2100
-
bzuk
- Mírně pokročilý
- Příspěvky: 65
- Registrován: 24.červen 2009 - 15:02
- satelitni prijimac: VU+ Solo2
- Bydliště: Bratislava
Re: Raspberry PI model B (oscam?)
ak ma niekto zaujem o usb2citacku, zopar kusov mam na predaj http://www.ab-forum.info/viewtopic.php?f=7&t=59680
USB Programmer Phoenix na predaj https://ab-forum.info/viewtopic.php?t=81057
LCD LG 37LD450
VU+ Solo2
Maximum E-85 multifocus(1°;13°;16;19,2°;23,5°;28,2°)
LNB AB LNB01 MTwin
OPENBOX SF-30, SF-55
LCD LG 37LD450
VU+ Solo2
Maximum E-85 multifocus(1°;13°;16;19,2°;23,5°;28,2°)
LNB AB LNB01 MTwin
OPENBOX SF-30, SF-55
-
bzuk
- Mírně pokročilý
- Příspěvky: 65
- Registrován: 24.červen 2009 - 15:02
- satelitni prijimac: VU+ Solo2
- Bydliště: Bratislava
Re: Raspberry PI model B (oscam?)
anoalfsvk píše:Aky CHIP? /zrejme FTDI ked je dualna/
rozmyslal som aj nad QUAD, ale cena by sla hore, lebo by to chcelo aj viacej suciastok
USB Programmer Phoenix na predaj https://ab-forum.info/viewtopic.php?t=81057
LCD LG 37LD450
VU+ Solo2
Maximum E-85 multifocus(1°;13°;16;19,2°;23,5°;28,2°)
LNB AB LNB01 MTwin
OPENBOX SF-30, SF-55
LCD LG 37LD450
VU+ Solo2
Maximum E-85 multifocus(1°;13°;16;19,2°;23,5°;28,2°)
LNB AB LNB01 MTwin
OPENBOX SF-30, SF-55
-
Brandy20
- Pokročilý
- Příspěvky: 233
- Registrován: 21.únor 2008 - 0:02
- satelitni prijimac: X403, 9600, 4060, X810, S300
Re: Banana Pi
Zdravím, skusal niekto na tejto masinke rozbehat Sata disk, mne sa to nepodario s 2.5 250GB 5V 0,6A. Ani sa po zapojení nesnaží rozbehnúť, zdroj mám zatial 5V 1.5A
Aktualne Octagon sf8008 supreme , ostatne uz len minulost -GIGABLUE HD QUAD PLUS, Skytec Kleio -vždy najnovší fw. AB Ipbox 9900 - ET 9200 spomienky a este sa najde vždy nejaký STB na testovanie , prijem parabola Maximum E85 Fe Multifocus ( 4/5W,1W,5E,9E, 13E, 19,2E, 23,5E, 28,5E)
-
pepe-flash
- Registrovaný
- Příspěvky: 14
- Registrován: 18.listopad 2007 - 9:58
- satelitni prijimac: DM500, IP9900,PRISMCUBE
- Kontaktovat uživatele:
Re: Banana Pi
ja mám zdroj 5V/2A a 2.5" 500GB SATA behá úplne v pohode
toroid T90 (4,8W-1W-4E-9E-13E-19,2E-23,5E-28,2E)
-
Brandy20
- Pokročilý
- Příspěvky: 233
- Registrován: 21.únor 2008 - 0:02
- satelitni prijimac: X403, 9600, 4060, X810, S300
Re: Banana Pi
No asi bude slabý zdroj, vyskusam objednat ten 2A,ale aj tak tam zatial dám externý 1TB cez usb, rýchlosti by vraj mali byt podobne. Len pre info akou rýchlosťou sa ti zapisuje na disk po sieti?
Aktualne Octagon sf8008 supreme , ostatne uz len minulost -GIGABLUE HD QUAD PLUS, Skytec Kleio -vždy najnovší fw. AB Ipbox 9900 - ET 9200 spomienky a este sa najde vždy nejaký STB na testovanie , prijem parabola Maximum E85 Fe Multifocus ( 4/5W,1W,5E,9E, 13E, 19,2E, 23,5E, 28,5E)
-
pepe-flash
- Registrovaný
- Příspěvky: 14
- Registrován: 18.listopad 2007 - 9:58
- satelitni prijimac: DM500, IP9900,PRISMCUBE
- Kontaktovat uživatele:
-
Brandy20
- Pokročilý
- Příspěvky: 233
- Registrován: 21.únor 2008 - 0:02
- satelitni prijimac: X403, 9600, 4060, X810, S300
Re: Banana Pi
Chlapi nemozem na tom v oscame rozbehat citacku mouse, kde konfigy aj oscam su nahrata z raspberry, na ktorom to krásne dlhe mesiace slapalo.
citacku banana najde takto:
Bus 004 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT 232 USB-Serial (UART) IC
a ja ju mám zadanu zas takto:
[reader]
label = Citacka_Skylink_ICE
description =
enable = 1
protocol = mouse
device = /dev/ttyUSB0
neviem ci mam to usb0 ok, ale skusal som aj ine,
a po spustení píše toto:
2014/10/06 07:20:15 7AC708 h Citacka_Skylink_ICE [mouse] Restarting reader
2014/10/06 07:20:15 7AC708 h Citacka_Skylink_ICE [mouse] creating thread for device /dev/ttyUSB0
2014/10/06 07:20:15 7ECD28 r Citacka_Skylink_ICE [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=1000, cardmhz=357)
2014/10/06 07:20:16 7ECD28 r Citacka_Skylink_ICE [mouse] card detected
2014/10/06 07:20:17 7ECD28 r Citacka_Skylink_ICE [mouse] ATR: F7 FF F0 4E 70 00 00 68 8F FC 00 00 1F E3 60 07
2014/10/06 07:20:17 7ECD28 r Citacka_Skylink_ICE [mouse] ERROR: Could not read reader->convention
2014/10/06 07:20:17 7ECD28 r Citacka_Skylink_ICE [mouse] Error activating card.
citacku banana najde takto:
Bus 004 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT 232 USB-Serial (UART) IC
a ja ju mám zadanu zas takto:
[reader]
label = Citacka_Skylink_ICE
description =
enable = 1
protocol = mouse
device = /dev/ttyUSB0
neviem ci mam to usb0 ok, ale skusal som aj ine,
a po spustení píše toto:
2014/10/06 07:20:15 7AC708 h Citacka_Skylink_ICE [mouse] Restarting reader
2014/10/06 07:20:15 7AC708 h Citacka_Skylink_ICE [mouse] creating thread for device /dev/ttyUSB0
2014/10/06 07:20:15 7ECD28 r Citacka_Skylink_ICE [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=1000, cardmhz=357)
2014/10/06 07:20:16 7ECD28 r Citacka_Skylink_ICE [mouse] card detected
2014/10/06 07:20:17 7ECD28 r Citacka_Skylink_ICE [mouse] ATR: F7 FF F0 4E 70 00 00 68 8F FC 00 00 1F E3 60 07
2014/10/06 07:20:17 7ECD28 r Citacka_Skylink_ICE [mouse] ERROR: Could not read reader->convention
2014/10/06 07:20:17 7ECD28 r Citacka_Skylink_ICE [mouse] Error activating card.
Aktualne Octagon sf8008 supreme , ostatne uz len minulost -GIGABLUE HD QUAD PLUS, Skytec Kleio -vždy najnovší fw. AB Ipbox 9900 - ET 9200 spomienky a este sa najde vždy nejaký STB na testovanie , prijem parabola Maximum E85 Fe Multifocus ( 4/5W,1W,5E,9E, 13E, 19,2E, 23,5E, 28,5E)
Re: Banana Pi
pokud je reader nastaven prepinacem na 3.57MHz, pak se domnivam, ze
mhz=1000 .... je moc
nastav:
mhz=357
Petr
mhz=1000 .... je moc
nastav:
mhz=357
Petr
-
Brandy20
- Pokročilý
- Příspěvky: 233
- Registrován: 21.únor 2008 - 0:02
- satelitni prijimac: X403, 9600, 4060, X810, S300
Re: Banana Pi
no dal su ja na 800MHz a us slape,ale v raspberry som ju mal do teraz na 1000 a islo to,
Aktualne Octagon sf8008 supreme , ostatne uz len minulost -GIGABLUE HD QUAD PLUS, Skytec Kleio -vždy najnovší fw. AB Ipbox 9900 - ET 9200 spomienky a este sa najde vždy nejaký STB na testovanie , prijem parabola Maximum E85 Fe Multifocus ( 4/5W,1W,5E,9E, 13E, 19,2E, 23,5E, 28,5E)
Re: Banana Pi
K čemu ti těch 1000 krucinál bylo? A k čemu ti je 800?