ubuntu 14.04

[gusto1]

moze niekto otestovat ? s emu, ale bez softcamu (cesta je /etc/tuxbox/config)

[peter54]

2,36 MB - to snad nemyslíš vážne. Emu ti neodskusam - snad keby si poradil nieco na 19, 23, 28 čo by malo ísť v emu.

[gusto1]

Neviem co ide, mozno ORF

[peter54]

Podla najnovšieho softcamkey na mojich poziciach nic.

[gusto1]

A ide vobec v F4 turbo (myslim bez patchu)

[peter54]

Tak tu tvoju binarku ani nespustim - illegal instruction
Dobra sprava - mne to na 64 bitovom debiane spravi spustitelnu binarku.

Kód: Vybrat vše

root@spalna:/etc/init.d# ps |grep oscam
25400 root      7168 S    /usr/bin/oscam-svn11518-openpli40-webif-dvbapi-ssl-emu-upx --config-dir /etc/tuxbox/config/oscam --daemon --pidfile /tmp/oscam
25402 root     14684 S <  /usr/bin/oscam-svn11518-openpli40-webif-dvbapi-ssl-emu-upx --config-dir /etc/tuxbox/config/oscam --daemon --pidfile /tmp/oscam
26888 root      2784 S    grep oscam
root@spalna:/etc/init.d# ./softcam_test restart

oscam_emu.gif

[peter54]

Problemik - nech robim ako robim, s3 mi spravi vzdy binarku s dynamickymi kniznicami.
oscam-svn11518-openpli40-webif-dvbapi-ssl-upx mi funguje na openpli bez dalsich zasahov
pre binarku oscam-svn11518-mipsoe20-webif-dvbapi-ssl-upx a oscam-svn11518-mipsel-webif-dvbapi-ssl-upx to musim suntit prikazom ln.

Vie niekto ako ho dokopat k statickym knizniciam, teda prilinkovanym priamo do binarky?

Kód: Vybrat vše

root@spalna:~# /etc/init.d/softcam_test restart
+ case "$1" in
+ /etc/init.d/softcam_test stop
+ case "$1" in
++ cat /tmp/oscam.pid
cat: can't open '/tmp/oscam.pid': No such file or directory
+ kill
+ exit 0
+ sleep 1
+ /etc/init.d/softcam_test start
+ case "$1" in
+ ulimit -s 1024
+ /usr/bin/oscam-svn11518-mipsoe20-webif-dvbapi-ssl-upx --config-dir /etc/tuxbox/config/oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
/usr/bin/oscam-svn11518-mipsoe20-webif-dvbapi-ssl-upx: error while loading shared libraries: libssl.so.0.9.8: cannot open shared object file: No such file or directory
+ exit 0
+ exit 0
root@spalna:~# ln -s  /usr/lib/libcrypto.so.1.0.0 /usr/lib/libcrypto.so.0.9.8
root@spalna:~# ln -s  /usr/lib/libssl.so.1.0.0  /usr/lib/libssl.so.0.9.8
root@spalna:~# /etc/init.d/softcam_test restart
+ case "$1" in
+ /etc/init.d/softcam_test stop
+ case "$1" in
++ cat /tmp/oscam.pid
cat: can't open '/tmp/oscam.pid': No such file or directory
+ kill
+ exit 0
+ sleep 1
+ /etc/init.d/softcam_test start
+ case "$1" in
+ ulimit -s 1024
+ /usr/bin/oscam-svn11518-mipsoe20-webif-dvbapi-ssl-upx --config-dir /etc/tuxbox/config/oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
WARNING: Web interface UTF-8 mode enabled. Carefully read documentation as bugs may arise.
+ exit 0
+ exit 0
root@spalna:~#

[liquere]

Nieco som ti odpisal, niekto to zmazal, no a rozhlas po drote robit nemam chut .....

[peter54]

@liker: Ak to moderátor zmazal, asi to zrejme užitočné nebolo.

Stary simplebuild mal v menu možnosť static=1, ten vsak nemám. Toolchainy mipsoe20 aj mipsel davajú odkaz na starsie kniznice a bude to problém aj ďalších toolchainov - riešiteľne napríklad
root@spalna:~# ln -s /usr/lib/libcrypto.so.1.0.0 /usr/lib/libcrypto.so.0.9.8
root@spalna:~# ln -s /usr/lib/libssl.so.1.0.0 /usr/lib/libssl.so.0.9.8

Také riešenie nemusí vzdy fungovať, tak by som radsej vyskúšal statické riešenie. Predpokladám, ze malou úpravou skriptu simplebuild by to mohlo ísť.
Velmi by pomohol ten starý skript, potom by som nemusel špekulovať a stacilo by príslušnú časť prihodiť do s3.

[gchevalier]

Kód: Vybrat vše

/root/s3/oscam-svn/README                            3359/3820               87%
OSCam by default do not depend on external libraries except when compilation
with SSL is requested. In that case openssl (libcrypto) library must be
installed.

OSCam supports building with the following external dependencies:
  - libcrypto (libssl) - 'make USE_LIBCRYPTO=1'
  - libusb             - 'make USE_LIBUSB=1'
  - PCSC               - 'make USE_PCSC=1'
  - SH4 STAPI support  - 'make USE_STAPI=1'
  - SH4 STAPI5 support - 'make USE_STAPI5=1'
  - Coolapi support    - 'make USE_COOLAPI=1'
  - AZBOX support      - 'make USE_AZBOX=1'

...


/root/s3/oscam-svn/README.build                     13207/14807              89%

 Predefined targets in Makefile.extra:

    make libusb        - Builds OSCam with libusb support
    make pcsc          - Builds OSCam with PCSC support
    make pcsc-libusb   - Builds OSCam with PCSC and libusb support
    make dm500         - Builds OSCam for Dreambox (DM500)
    make sh4           - Builds OSCam for SH4 boxes
    make azbox         - Builds OSCam for AZBox STBs
    make mca           - Builds OSCam for Matrix Cam Air (MCA)
    make coolstream    - Builds OSCam for Coolstream
    make dockstar      - Builds OSCam for Dockstar
    make qboxhd        - Builds OSCam for QBoxHD STBs
    make opensolaris   - Builds OSCam for OpenSolaris
    make uclinux       - Builds OSCam for m68k uClinux

 Predefined targets for static builds:
    make static        - Builds OSCam statically
    make static-libusb - Builds OSCam with libusb linked statically
    make static-libcrypto - Builds OSCam with libcrypto linked statically
    make static-ssl    - Builds OSCam with SSL support linked statically

[liquere]

Tam este nie je vsetko dotiahnute , ale pokial mas cas sa hrat s prikazmi mozno ta to aj bavi ...........

[peter54]

Keby ma nebavilo, tak to neriesim. Ja si viem skompilovat oscam aky chcem, staticke kniznice su vnimane ako krok spat. Vyhoda tu je, ze nemusíš riešiť veci ak by si taku binarku chcel postnut na fore. Je tu vela menej pokročilých uzivatelov, ktorí by to snáď vyuzili.
Ked mas starý s3 pomohlo by ho dať k dispozicii.
Pripadny takto vylepsen, s3 by som poskytol.

[liquere]

Naposledy sa dali stiahnut posledne verzie S3 uz to tam nie je? Predchadzajuca bola nejaka 5 a nieco .....

[jajo4546]

totok ak ti to pomoze

[liquere]

A oko ste daleko s pokusmi?

[peter54]

Ja som uz pokusy ukoncil. Viď vyššie. Co ešte chceš skúšať? Vsetko ide.

[gusto1]

Vies tu poslat 11518 s emu patchom (s klucami v binarke) pre AFN ?

[peter54]

V pondelok ti to spravim. Na ktory procak to ma byt? Posli SoftCam.Key, a co tam presne chces.

[gusto1]

formuler, mipsoe2. Nejake softcamy su tu http://www.satsupreme.com/ulc.php/6-Softcam ja som softcam snad 10 roky nevidel. Otestovat by som mohol afn a orf napr. Ale ked si pamatam, tak do oscamu treba pridat reader pre emu. Musim to prestudovat este (ked bude viac casu).

[peter54]

Mozes sa hrat. Mal by v tom byt aj celkom zanovny SoftCam.Key
" Created Time: 19/may/2019 04:00 A.M. GMT OSCAM-EMU "
;* This SoftCam.Key ONLY Satellite CHANNELS for OSCAM-EMU

Ja naposledy emuloval pred viac ako 5 rokmi ORF a zo Softcamkey som si robil nejaky subor, ktory amiko a opticum nacital z usb.
Osobne to nemam kde vyskusat.


Zaruky ako obvykle ziadne.

+-------------------------------------------------------------------------------
| OSCam ver: 1.20_svn rev: 11518-796 target: mipsel-unknown-linux-gnu-ssl
| Tools:
| CROSS = /opt/s3/support/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-
| CC = /opt/s3/support/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-gcc
| Settings:
| CONF_DIR = /var/tuxbox/config
| CC_OPTS = -O0 -ggdb -pipe -ffunction-sections -fdata-sections
| CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
| CFLAGS = -fexpensive-optimizations -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_UTF8=1 -DWITH_UTF8
| LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_UTF8=1 -DWITH_UTF8
| LIBS = -lssl -lcrypto -lm -lpthread -ldl
| UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_UTF8=1
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING WITH_DEBUG MODULE_MONITOR WITH_LB WITH_EMU WITH_SOFTCAM
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX SCAM
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL STINGER
| Compiler : mipsel-unknown-linux-gnu-gcc (crosstool-NG 1.15.2) 4.6.3
| Config : build/mipsel-unknown-linux-gnu-ssl/config.mak
| Binary : /opt/s3/support/binaries/oscam-svn11518-mipsoe20-webif-dvbapi-emu-upx
+-------------------------------------------------------------------------------

oscam-svn11518-mipsoe20-webif-dvbapi-emu-upx.tar.gz