OSCAM - NAS

[kratke_pole]

Ale no, par prispevkov vyssie som dal postup ako na 6.2.
Slabo si pozeral a cital.

[Zipík]

Zkoušel jsem i jiný postup ale stále píše při kopírování souboru přístup odepřen Jdu se vyspat a zkusím zítra.Díky za směrování.ROOT by měl být ale hotový, jde to nějak zjistit?

Soubor sshd_config je upraven a mřížka před PermitRootLogin yes je vymazána

[Zipík]

Tak se zadařilo a skript nahrán do nass ale do složky rc.sysv, kde jsem našel další skripty.Složka rc.d/ v mém nass není.Nicméně čtečka pořád nejede...

Aktualizace:

Takže už nevím kudy dál, vše jsem udělal podle návodů ale čtečka pořád nic.Složku rc.d/ jsem prostě nenašel.Díky za info
Ještě pro info:DS218+
INTEL Celeron J3355

[gif]

Čau,

trošku to tu oživím, mám vše na Nasu zprovozněné včetně čteček, ale zřejmě neprochází emm zápisy verze oscamu 11572 .
Nevíte jestli zápisy jsou funkční nebo ne nebo kde je problém?? Jen upřesním stejné nastavení mi jinde funguje bez problémů.

moc díky za odpověď

[gold.emilya]

Dobry den prosim o radu dnes som zaktualizoval na tuto verziu https://synology.nimloth.pl/?arch=apollolake
Ale na synology po zapnuti citacky cez usb tak socam padne je moznost niekde stiahntu starsiu verziu oscam a pcslite?

[EnoSat]

ide v pohode

Kód: Vybrat vše

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Fri Apr 17 15:55:13 2020
-------------------------------------------------------------------------------
2020/04/17 15:55:13 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11572 (x86_64-pc-linux-gnu-ssl-libusb-pcsc)
2020/04/17 15:55:13 00000000 s debug_level=2
2020/04/17 15:55:13 00000000 s     (main) System name    = Linux
2020/04/17 15:55:13 00000000 s     (main) Host name      = xpentology
2020/04/17 15:55:13 00000000 s     (main) Release        = 3.10.105
2020/04/17 15:55:13 00000000 s     (main) Version        = #24922 SMP Wed Jul 3 16:37:23 CST 2019
2020/04/17 15:55:13 00000000 s     (main) Machine        = x86_64
2020/04/17 15:55:13 00000000 s     (main) creating pidfile /volume1/@appstore/oscam/var/run/oscam.pid with pid 21632
2020/04/17 15:55:13 00000000 s   (config) userdb reloaded: 19 accounts loaded, 0 expired, 0 disabled
2020/04/17 15:55:13 00000000 s     (main) signal handling initialized
2020/04/17 15:55:13 00000000 s   (config) 433 tier-id's loaded
2020/04/17 15:55:13 00000000 s      (net) cs357x: initialized (fd=5, port=16011)
2020/04/17 15:55:13 00000000 s      (net) cs378x: initialized (fd=6, port=16012)
2020/04/17 15:55:13 00000000 s      (net) newcamd: initialized (fd=7, port=16013)
2020/04/17 15:55:13 00000000 s      (net) -> CAID: 0B00 PROVID: 000000, FFFFFF
2020/04/17 15:55:13 00000000 s      (net) cccam: initialized (fd=8, port=16016)
2020/04/17 15:55:13 00000000 s      (net) gbox: initialized (fd=9, port=16015)
2020/04/17 15:55:13 00000000 s      (net) radegast: initialized (fd=10, port=16014)
2020/04/17 15:55:13 00000000 s      (net) scam: initialized (fd=11, port=16017)
2020/04/17 15:55:13 00000000 s   (reader) USB0_183E [mouse] creating thread for device /dev/ttyUSB0
2020/04/17 15:55:13 00000000 s   (reader) USB1_0963 [mouse] creating thread for device /dev/ttyUSB1
2020/04/17 15:55:13 00000000 s   (reader) USB3_0500 [mouse] creating thread for device /dev/ttyUSB3
2020/04/17 15:55:13 00000000 s   (reader) USB4_0BAA [mouse] creating thread for device /dev/ttyUSB4
2020/04/17 15:55:13 00000000 s   (reader) USB5_0B00 [mouse] creating thread for device /dev/ttyUSB5
2020/04/17 15:55:13 00000000 s   (reader) USB6_0624 [mouse] creating thread for device /dev/ttyUSB6
2020/04/17 15:55:13 00000000 s   (reader) USB7_0D96 [mouse] creating thread for device /dev/ttyUSB7
2020/04/17 15:55:13 00000000 s   (reader) GBOXMIO [gbox] creating thread for device 192.168.1.18
2020/04/17 15:55:13 53085663 p     (gbox) we are online - 1 port(s) to monitor

[gold.emilya]

ja ked nahram tie dve veci na ds218+ tak po zapnuti readeru mi to pada
pcslite mate aku verziu?

[gold.emilya]

AKo by som vedel fixnut tieto errory ? A ked pripojim usb citacku tak vypne a neda sa znova zapnut preto by som cchel niekde stiahnut stary oscam na synology 11529 a stary pcslite terza mam 1.8.25-1 kde by som nasiel stare verzie?

Kód: Vybrat vše

2020/04/17 16:22:22 00000000 s     (main) System name    = Linux
2020/04/17 16:22:22 00000000 s     (main) Host name      = synology
2020/04/17 16:22:22 00000000 s     (main) Release        = 4.4.59+
2020/04/17 16:22:22 00000000 s     (main) Version        = #24922 SMP PREEMPT Mon Aug 19 12:13:37 CST 2019
2020/04/17 16:22:22 00000000 s     (main) Machine        = x86_64
2020/04/17 16:22:22 00000000 s     (main) creating pidfile /volume1/@appstore/oscam/var/run/oscam.pid with pid 21481
2020/04/17 16:22:22 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2020/04/17 16:22:22 00000000 s     (main) signal handling initialized
2020/04/17 16:22:22 00000000 s      (net) newcamd: initialized (fd=5, port=9001)
2020/04/17 16:22:22 00000000 s      (net) -> CAID: 0B01 PROVID: 000000
2020/04/17 16:22:22 00000000 s      (net) cccam: initialized (fd=6, port=16001)
2020/04/17 16:22:22 00000000 s (anticasc) anti cascading disabled
2020/04/17 16:22:22 670F40AD h    (webif) webif: decompressed 181940 bytes back into 450568 bytes
2020/04/17 16:22:22 670F40AD h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/CSS.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/17 16:22:22 670F40AD h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;2221490740;1.20_svn;11572;-->
2020/04/17 16:22:22 670F40AD h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/FOOTER.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/17 16:22:22 670F40AD h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;16619484;1.20_svn;11572;-->
2020/04/17 16:22:22 670F40AD h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/HEADERSHORT.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/17 16:22:22 670F40AD h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;267516716;1.20_svn;11572;-->
2020/04/17 16:22:22 670F40AD h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/JQUERY.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/17 16:22:22 670F40AD h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;1860189373;1.20_svn;11572;-->
2020/04/17 16:22:22 670F40AD h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/JSCRIPT.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/17 16:22:22 670F40AD h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;3536674531;1.20_svn;11572;-->
2020/04/17 16:22:22 670F40AD h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/CLIENTHEADLINEBIT.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/17 16:22:22 670F40AD h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;3093935193;1.20_svn;11572;-->
2020/04/17 16:22:22 670F40AD h    (webif) HTTP Server running. ip=:: port=9000
2020/04/17 16:22:31 670F40AD h   (reader) pcsc1 [pcsc] Restarting reader
2020/04/17 16:22:31 670F40AD h   (reader) pcsc1 [pcsc] creating thread for device 0
2020/04/17 16:22:31 670F40AD h    (webif) reader pcsc1 enabled by WebIf
2020/04/17 16:22:31 3DE95560 r   (reader) pcsc1 [pcsc] Cannot open device: 0
2020/04/17 16:22:33 3DE95560 r   (reader) pcsc1 [pcsc] Cannot open device: 0
2020/04/17 16:22:35 3DE95560 r   (reader) pcsc1 [pcsc] Cannot open device: 0
2020/04/17 16:22:37 3DE95560 r   (reader) pcsc1 [pcsc] Cannot open device: 0
2020/04/17 16:22:39 3DE95560 r   (reader) pcsc1 [pcsc] Cannot open device: 0

[peter54]

Cannot open device 0 naznacuje, ze pcsc lite nemas korektne nainštalované.
Co ti hovori pcsc_scan?
Kym ten nevidi citacky a karty, tak si oscam neskrkne.
Malo by to vyzerať nejako takto s 2 antiksat kartami

Kód: Vybrat vše

root@pi_zero:~# pcsc_scan 
PC/SC device scanner
V 1.4.23 (c) 2001-2011, Ludovic Rousseau <ludovic.rousseau@free.fr>
Compiled with PC/SC lite version: 1.8.11
Using reader plug'n play mechanism
Scanning present readers...
0: Gemalto PC Twin Reader 00 00
1: Alcor Micro AU9540 01 00

Fri Apr 17 17:42:42 2020
Reader 0: Gemalto PC Twin Reader 00 00
  Card state: Card inserted, Exclusive Mode, 
  ATR: 3B 24 00 30 42 30 30

ATR: 3B 24 00 30 42 30 30
+ TS = 3B --> Direct Convention
+ T0 = 24, Y(1): 0010, K: 4 (historical bytes)
  TB(1) = 00 --> VPP is not electrically connected
+ Historical bytes: 30 42 30 30
  Category indicator byte: 30 (proprietary format)

Possibly identified card (using /usr/share/pcsc/smartcard_list.txt):
3B 24 00 30 42 30 30
ComHem Digital-TV smartcard (Sweden)
TNK Telewizja Na Kartę (Poland) - Conditional access system : Conax (Norway)
http://telewizjanakarte.pl/
Reader 1: Alcor Micro AU9540 01 00
  Card state: Card inserted, Exclusive Mode, 
  ATR: 3B 24 00 30 42 30 30

ATR: 3B 24 00 30 42 30 30
+ TS = 3B --> Direct Convention
+ T0 = 24, Y(1): 0010, K: 4 (historical bytes)
  TB(1) = 00 --> VPP is not electrically connected
+ Historical bytes: 30 42 30 30
  Category indicator byte: 30 (proprietary format)

Possibly identified card (using /usr/share/pcsc/smartcard_list.txt):
3B 24 00 30 42 30 30
ComHem Digital-TV smartcard (Sweden)
TNK Telewizja Na Kartę (Poland) - Conditional access system : Conax (Norway)
http://telewizjanakarte.pl/

Alebo takto s ticket restaurant kartou

Kód: Vybrat vše

root@pipc:~# pcsc_scan
Using reader plug'n play mechanism
Scanning present readers...
0: Alcor Micro AU9520 00 00

Fri Apr 17 18:16:27 2020
 Reader 0: Alcor Micro AU9520 00 00
  Event number: 14
  Card state: Card removed,

Fri Apr 17 18:16:30 2020
 Reader 0: Alcor Micro AU9520 00 00
  Event number: 15
  Card state: Card inserted,
  ATR: 3B 65 00 00 20 63 CB AD 20

ATR: 3B 65 00 00 20 63 CB AD 20
+ TS = 3B --> Direct Convention
+ T0 = 65, Y(1): 0110, K: 5 (historical bytes)
  TB(1) = 00 --> VPP is not electrically connected
  TC(1) = 00 --> Extra guard time: 0
+ Historical bytes: 20 63 CB AD 20
  Category indicator byte: 20 (proprietary format)

Possibly identified card (using /usr/share/pcsc/smartcard_list.txt):
3B 65 00 00 20 63 CB AD 20
        bpost bpaid (Bank)
        http://www.bpost.be/bpaid/
        KBC Ireland Mastercard Debit (Bank)
        ING Direct MasterCard (Bank)
        https://www.ingdirect.es/
 /

[gold.emilya]

Nove verzie na synology robia problem ale nikde nemozem najst stare verzie
Stare verzie kde by som stiahol?

[EnoSat]

nepouzivam pcsc a mam starsi kernel

[gold.emilya]

Dakujem za radu.
Prosim potom ako je nastavena citacka po pripojeni do usb synology?
Staci zadat takuto cestu? alebo inu? device = /dev/ttyUSB0
Ako mate na synology nastaveny usb reader?

[EnoSat]

http://www.ab-forum.info/viewtopic.php?p=798611#p798611

[gold.emilya]

Dakujem. Uz som nahral dany doplnok na usb. Chcem sa opytat na skylink caid 0D96 ked pouzivam na synology usb reader ako je potrebne nastavit tento config? Ako zistim na ktorom usb je pripojene usb citacka? mam ju pripojenu vzadu ale neviem ci to je usb0 alebo usb1.

Kód: Vybrat vše

[reader]
label                         = pcsc1
description                   = usb reader
protocol                      = mouse
device                        = /dev/ttyUSB0
caid                          = 0D96
detect                        = cd
group                         = 1
emmcache                      = 1,3,2,0

Kód: Vybrat vše

(reader) pcsc1 [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=6 No such device or address)
2020/04/20 08:39:36 7AD2697B r   (reader) pcsc1 [mouse] Cannot open device: /dev/ttyUSB1
2020/04/20 08:39:38 7AD2697B r   (reader) pcsc1 [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=6 No such device or address)
2020/04/20 08:39:38 7AD2697B r   (reader) pcsc1 [mouse] Cannot open device: /dev/ttyUSB1
2020/04/20 08:39:40 7AD2697B r   (reader) pcsc1 [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=6 No such device or address)
2020/04/20 08:39:40 7AD2697B r   (reader) pcsc1 [mouse] Cannot open device: /dev/ttyUSB1
2020/04/20 08:39:42 7AD2697B r   (reader) pcsc1 [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=6 No such device or address)
2020/04/20 08:39:42 7AD2697B r   (reader) pcsc1 [mouse] Cannot open device: /dev/ttyUSB1
2020/04/20 08:39:44 7AD2697B r   (reader) pcsc1 [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=6 No such device or address)
2020/04/20 08:39:44 7AD2697B r   (reader) pcsc1 [mouse] Cannot open device: /dev/ttyUSB1

[peter54]

Nastavenia su uplne ine podla typu citacky.
Pokial nevieme aky typ mas, vsetky rady su vystrely do vzduchu. Podla typu citacky sa potom urci co zadat ako protocol a ako zistit device.

[gold.emilya]

Priklad foto co mam pripojene.

[peter54]

Tak sme doma - je to pcsc respektive ccid citacka.
https://www.acs.com.hk/en/driver/87/acr ... rd-reader/

Potrebujes nainstalovat pcsc-lite balicek, otestovat ako som vyssie pisal cez pcsc_scan a az ked toto pojde, tak potom
protocol = pcsc
device = 0

Na /dev/ttyUSB0 a podobne zabudni.
Pripadne si najdi niekde navod presne pre tvoj stroj a podla neho.

[gold.emilya]

Aku citacku by ste mi odporucli na pripojenie napr. do synology?
Aku pouzivate na pripojenie?

[gold.emilya]

Problem je ze ked nahram psc-lite tak hned vypne oscam preto neviem kde je problem
https://synology.nimloth.pl/?arch=rtd1296

[EnoSat]

ja som skusil toto

20200420_211855.jpg

Kód: Vybrat vše

[reader]
label                         = USB6_0624
protocol                      = mouse
device                        = /dev/ttyUSB6
#pincode                       = 1234
detect                        = none
group                         = 7
emmcache                      = 1,2,3,0
boxkey                        = B1B2B3B4B5B6B7B8
rsakey                        = AB722A8CAA9F58DE0D1CBB6FF329C961ED9DD759B103082D1BAE64C27A861D42E7F631891C2660EFA57484F80BBB4E0E8249A8368E31BD3FFC369FBE95160528

PS: nie som si isty ci vobec na pcsc donutis kartu bezat v IRD mode