AB-FÓRUM - Satelitné fórum (Satelity, DVB-T/T2, DVB-C, IPTV)

Warning : Recommended only for image version r8340 and next !!!


Include additional function for AB images for AB IPBox 910HD.


Client : MGCAMD
Server : NEWCST
Red button : key update
Green button : server/client reboot
*******************************
Instalation

copy "addon_version-910HD_sh4_231008.ipk" to /tmp
connect to box with webinterface ( write IP adress of your box to internet browser)
use login/password : root/ipbox

go to menu addons
press install
wait for STB reboot

configuration files are located in var/tuxbox/config

changes:
add information banners

Nový addon na AB r8630.
Instalace stejná, jako předchozí addon.

Addon version 230109 for AB Image

Remove Red button for key update, You can update keys only from webinterface.

Upgrade Newcs 1.65 version

For upgrade read instruction in Beginners guide for AB IPBox HD series on this website.

SF addon rel 010409 for AB Images 9057 and next

- update channel list settings

- update installed plugins versions

Install with USB memory stick same as other software :

Software upgrade through flash USB memory device (host):

- Format your USB memory device .
- Copy an image software (any of usb_all, usb_all_noboot…..) from your PC into USB flash memory and rename it into "usb_update.img" .
- Use “Safety remove USB device” function before disconnecting your USB flash memory.
- Turn off your receiver (Standby+OK ) and connect USB memory to USB (host) connector on your receiver.
- Press and hold Standby on front panel until “BOOTING” message appears on display. Press Up button . “USB UPGRADE” message shoul appear on display of your receiver – software update performs automatically.
- Wait until DONE message appears and restart your receiver.


Warning: Do not turn off or operate your receiver during software upgrade !!!

SFaddon_with_Sifteam_add_910_220609_usb_db


SF addon with complete installation of SifTeam panel.

Change log:
- fixed EPG problem on ASTRA 23.5E, TV JOJ and JOJ PLUS

webif and ftp access: root/ipbox

Installation (same as main image):

- Copy file from your PC into USB flash memory and rename it into "usb_update.img"
- Use “Safety remove USB device” function before disconnecting your USB flash memory from PC !
- Turn off your receiver (Standby+OK ) and connect USB memory to USB (host) connector on your receiver.
- Press and hold Standby on front panel until “BOOTING” message appears on display.
Press Up button . “USB UPGRADE” message shoul appear on display of your receiver – software update performs automatically.
- Wait until DONE message appears and restart your receiver.