AB PULSe 4K - HDMI CEC
HDMI CEC
HDMI cec it does not wake up the receiver. Interestingly, only the pulse4k has this problem, the ultimo4k and the Viper 4K V40 wake it up without a problem. There could be a software problem here.
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Rx: 11:44:14 <Give OSD Name> < 46 01
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:44:14 <Give OSD Name> < 46 00
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:44:14 <Give OSD Name> < 46 BE
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <Give OSD Name> < 46 01
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:25 <Set System Audio Mode> < 72 01
Rx: 11:44:25 <Set System Audio Mode> < 72 01
Rx: 11:44:26 <Set Stream Path> < 86 11
Rx: 11:44:26 <Active Source> < 82 11
Rx: 11:44:26 <Routing Information> < 81 11
Rx: 11:44:26 <Set Stream Path> < 86 11
Rx: 11:44:27 <Set Stream Path> < 86 11
Rx: 11:44:27 <Active Source> < 82 11
Rx: 11:44:28 <Set Stream Path> < 86 11
Rx: 11:44:28 <Active Source> < 82 11
Tx: 11:44:41 <Standby> > 36 [0x00]
Tx: 11:44:41 <User Control Pressed> > 44 6C [0x05]
Tx: 11:44:41 <Standby> > 36 [0x05]
Tx: 11:45:29 <Active Source> > 82 12 00 [0x0F]
Tx: 11:45:29 <User Control Pressed> > 44 6D [0x05]
Tx: 11:45:29 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:45:29 <User Control Pressed> < 44 6D
Rx: 11:45:29 <User Control Pressed> < 44 6D
Rx: 11:45:29 <User Control Released> < 45 6D
Rx: 11:45:30 <Set System Audio Mode> < 72 01
Tx: 11:45:32 <Active Source> > 82 12 00 [0x0F]
Tx: 11:45:32 <User Control Pressed> > 44 6D [0x05]
Tx: 11:45:32 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:45:32 <Set System Audio Mode> < 72 01
Rx: 11:45:45 <Give Physical Address> < 83 00
Tx: 11:45:45 <Report Physical Address> > 84 12 00 04 [0x0F]
Rx: 11:45:45 <Give OSD Name> < 46 00
Tx: 11:45:45 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:45:45 <Give OSD Name> < 46 00
Tx: 11:45:45 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:48:25 <Set System Audio Mode> < 72 01
Rx: 11:48:25 <Set System Audio Mode> < 72 01
Rx: 11:48:25 <Set Stream Path> < 86 11
Rx: 11:48:25 <Routing Information> < 81 11
Rx: 11:48:26 <Set Stream Path> < 86 11
Rx: 11:48:26 <Active Source> < 82 11
Rx: 11:48:27 <Set Stream Path> < 86 11
Rx: 11:48:27 <Active Source> < 82 11
Tx: 11:48:39 <Standby> > 36 [0x00]
Tx: 11:48:39 <User Control Pressed> > 44 6C [0x05]
Tx: 11:48:39 <Standby> > 36 [0x05]
Tx: 11:50:18 <Active Source> > 82 12 00 [0x0F]
Tx: 11:50:18 <User Control Pressed> > 44 6D [0x05]
Tx: 11:50:18 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:50:19 <Reporting Device Vendor ID>< 87 00
Rx: 11:50:19 <Set System Audio Mode> < 72 01
Rx: 11:50:19 <Give Physical Address> < 83 01
Tx: 11:50:19 <Report Physical Address> > 84 12 00 04 [0x0F]
Rx: 11:50:19 <Set System Audio Mode> < 72 01
Rx: 11:50:19 <Give OSD Name> < 46 01
Tx: 11:50:19 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:50:20 <Give OSD Name> < 46 00
Tx: 11:50:20 <Set OSD Name> > 47 pulse4k [0x00]
Tx: 11:50:21 <Active Source> > 82 12 00 [0x0F]
Tx: 11:50:21 <User Control Pressed> > 44 6D [0x05]
Tx: 11:50:21 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:50:22 <Set System Audio Mode> < 72 01
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Tx: 11:43:55 <Give System Audio Mode Stat> 7D [0x05]
Rx: 11:44:14 <Give OSD Name> < 46 01
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:44:14 <Give OSD Name> < 46 00
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:44:14 <Give OSD Name> < 46 BE
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:14 <Give OSD Name> < 46 01
Tx: 11:44:14 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:44:14 <System Audio Mode Status> < 7E 01
Rx: 11:44:25 <Set System Audio Mode> < 72 01
Rx: 11:44:25 <Set System Audio Mode> < 72 01
Rx: 11:44:26 <Set Stream Path> < 86 11
Rx: 11:44:26 <Active Source> < 82 11
Rx: 11:44:26 <Routing Information> < 81 11
Rx: 11:44:26 <Set Stream Path> < 86 11
Rx: 11:44:27 <Set Stream Path> < 86 11
Rx: 11:44:27 <Active Source> < 82 11
Rx: 11:44:28 <Set Stream Path> < 86 11
Rx: 11:44:28 <Active Source> < 82 11
Tx: 11:44:41 <Standby> > 36 [0x00]
Tx: 11:44:41 <User Control Pressed> > 44 6C [0x05]
Tx: 11:44:41 <Standby> > 36 [0x05]
Tx: 11:45:29 <Active Source> > 82 12 00 [0x0F]
Tx: 11:45:29 <User Control Pressed> > 44 6D [0x05]
Tx: 11:45:29 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:45:29 <User Control Pressed> < 44 6D
Rx: 11:45:29 <User Control Pressed> < 44 6D
Rx: 11:45:29 <User Control Released> < 45 6D
Rx: 11:45:30 <Set System Audio Mode> < 72 01
Tx: 11:45:32 <Active Source> > 82 12 00 [0x0F]
Tx: 11:45:32 <User Control Pressed> > 44 6D [0x05]
Tx: 11:45:32 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:45:32 <Set System Audio Mode> < 72 01
Rx: 11:45:45 <Give Physical Address> < 83 00
Tx: 11:45:45 <Report Physical Address> > 84 12 00 04 [0x0F]
Rx: 11:45:45 <Give OSD Name> < 46 00
Tx: 11:45:45 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:45:45 <Give OSD Name> < 46 00
Tx: 11:45:45 <Set OSD Name> > 47 pulse4k [0x00]
Rx: 11:48:25 <Set System Audio Mode> < 72 01
Rx: 11:48:25 <Set System Audio Mode> < 72 01
Rx: 11:48:25 <Set Stream Path> < 86 11
Rx: 11:48:25 <Routing Information> < 81 11
Rx: 11:48:26 <Set Stream Path> < 86 11
Rx: 11:48:26 <Active Source> < 82 11
Rx: 11:48:27 <Set Stream Path> < 86 11
Rx: 11:48:27 <Active Source> < 82 11
Tx: 11:48:39 <Standby> > 36 [0x00]
Tx: 11:48:39 <User Control Pressed> > 44 6C [0x05]
Tx: 11:48:39 <Standby> > 36 [0x05]
Tx: 11:50:18 <Active Source> > 82 12 00 [0x0F]
Tx: 11:50:18 <User Control Pressed> > 44 6D [0x05]
Tx: 11:50:18 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:50:19 <Reporting Device Vendor ID>< 87 00
Rx: 11:50:19 <Set System Audio Mode> < 72 01
Rx: 11:50:19 <Give Physical Address> < 83 01
Tx: 11:50:19 <Report Physical Address> > 84 12 00 04 [0x0F]
Rx: 11:50:19 <Set System Audio Mode> < 72 01
Rx: 11:50:19 <Give OSD Name> < 46 01
Tx: 11:50:19 <Set OSD Name> > 47 pulse4k [0x05]
Rx: 11:50:20 <Give OSD Name> < 46 00
Tx: 11:50:20 <Set OSD Name> > 47 pulse4k [0x00]
Tx: 11:50:21 <Active Source> > 82 12 00 [0x0F]
Tx: 11:50:21 <User Control Pressed> > 44 6D [0x05]
Tx: 11:50:21 <System Audio Mode Request> > 70 12 00 [0x05]
Rx: 11:50:22 <Set System Audio Mode> < 72 01
Naposledy upravil(a) megatron dne 31.prosinec 2022 - 13:10, celkem upraveno 1 x.
- EnoSat
- Legenda Fóra
- Příspěvky: 2745
- Registrován: 20.únor 2008 - 19:16
- satelitni prijimac: Dreambox - Dr.HD F16 - TBS5925
- Kontaktovat uživatele:
Re: HDMI CEC
https://www.abcomeu.com/contact - technical support
HDMI CEC-
Automatic switching of HDMI output to TV input. OFF by default.
Menu/Setting/System/setting HDMI-CEC ( on/off )
HDMI CEC-
Automatic switching of HDMI output to TV input. OFF by default.
Menu/Setting/System/setting HDMI-CEC ( on/off )
ROVER TAB900+ , Televes H30 FLEX
Gibertini OP100LN /85E-53W/
WaveFrontier T90 /51E-39E-36E-33E-28E-26E-23E-19E-16E-13E-9E-7E-5E-2E-1W-4W/
Edision MIO+ 4K, Octagon SF8008, Mutant HD51, QVIART Lunix, Ustym 4K S2 OTT, VU Solo4K, Dreambox 900UHD/7020HD/500HD, TBS-5925/5530/5220
Gibertini OP100LN /85E-53W/
WaveFrontier T90 /51E-39E-36E-33E-28E-26E-23E-19E-16E-13E-9E-7E-5E-2E-1W-4W/
Edision MIO+ 4K, Octagon SF8008, Mutant HD51, QVIART Lunix, Ustym 4K S2 OTT, VU Solo4K, Dreambox 900UHD/7020HD/500HD, TBS-5925/5530/5220
Re: HDMI CEC
I've tried all options, it won't wake up from Standby in any way!
Naposledy upravil(a) EnoSat dne 31.prosinec 2022 - 14:29, celkem upraveno 2 x.
Důvod: fix QUOTE & VIDEO
Důvod: fix QUOTE & VIDEO
-
- Pokročilý
- Příspěvky: 244
- Registrován: 30.prosinec 2018 - 10:56
Re: HDMI CEC
what tv brand/model do you have (LG something ..?)
Re: HDMI CEC
The tools I use. Epson TW7100 (HDMI LINK), Samsung UE32D6500 (Anynet+), Denon AVR X2700H DAB, ultimo 4k and viper4k V40 receivers wake up from standby, only pulsed 4K does not!
Naposledy upravil(a) EnoSat dne 31.prosinec 2022 - 14:23, celkem upraveno 1 x.
Důvod: fix QUOTE
Důvod: fix QUOTE
-
- Pokročilý
- Příspěvky: 244
- Registrován: 30.prosinec 2018 - 10:56
Re: HDMI CEC
so, to be clear, you are using your TV remote control (Samsung) to wake up all devices and only AB device is not waking up, and you have set up AB device to catch waking up signal from TV. And surely each device has its own CEC ID ...
AB device is connected directly to TV and not through other device HDMI input. The ID shown in AB device is unique ...
AB device is connected directly to TV and not through other device HDMI input. The ID shown in AB device is unique ...
Re: HDMI CEC
it is as you wrote.
Naposledy upravil(a) EnoSat dne 31.prosinec 2022 - 23:29, celkem upraveno 1 x.
Důvod: fix QUOTE
Důvod: fix QUOTE
-
- Pokročilý
- Příspěvky: 244
- Registrován: 30.prosinec 2018 - 10:56
Re: HDMI CEC
hmm, this problem is also described on openpli forum,
this is probably better approach (to solve it there) as they are making image, supporting this device and have contact with device manufacturer.
Looks like Samsung is quite spread TV, so if you precisely describe the situation, setup, devices, debug logs, ... there is chance that somebody from devs will take care ... (if your setup is not very rare), because, at the end - you probably still need to use original remote to control device for some tasks.
this is probably better approach (to solve it there) as they are making image, supporting this device and have contact with device manufacturer.
Looks like Samsung is quite spread TV, so if you precisely describe the situation, setup, devices, debug logs, ... there is chance that somebody from devs will take care ... (if your setup is not very rare), because, at the end - you probably still need to use original remote to control device for some tasks.
Re: Review AB Pulse 4K
Basically none of the settings in the HDMI-CEC Setup menu are working to wake the Pulse 4K !
Naposledy upravil(a) EnoSat dne 03.leden 2023 - 10:35, celkem upraveno 1 x.
Důvod: fix QUOTE
Důvod: fix QUOTE
Re: Pozime sa na AB Pulse 4K
What about the seller/manufacturer/distributor, have you already contacted him or are you just waiting for someone to solve your problem for you ?
Re: Pozime sa na AB Pulse 4K
In the meantime, I realized that nobody here is interested in helping me. I contacted the manufacturer.
Naposledy upravil(a) EnoSat dne 03.leden 2023 - 21:07, celkem upraveno 1 x.
Důvod: fix QUOTE
Důvod: fix QUOTE
Re: AB PULSe 4K - HDMI CEC
Maybe if you used the magic word "please" ! Believe that he works miracles.
Good luck.
Good luck.