Antik TV BENDR SK

AB-FÓRUM - Satelitné fórum (Satelity, DVB-T, DVB-C)

Česko-Slovenské diskusní fórum nejen o satelitním příjmu televizních programů.
Právě je 23.Leden 2021 - 15:06

Všechny časy jsou v UTC+01:00




Poslat nové téma  Odpovědět do tématu  [ 430 příspěvků ]  Přejít na stránku Předchozí 118 19 20 21 22
Autor Zpráva
 Předmět příspěvku: Re: Instalacia noveho formuler F4 turbo
PříspěvekOdeslal: 09.Květen 2020 - 11:26 
Offline
Legenda Fóra
Legenda Fóra
Avatar uživatele

Registrován: 30.Srpen 2009 - 21:02
Příspěvky: 5104
Místo/Bydliště: okr. Nitra
Poděkoval: 20 krát
Poděkováno: 135 krát
A image si aké skúšal?
OpenATV, OpenPLi, OpenVIX, OpenSPA či iné?

_________________
X-Trend ET10000+2TB HDD
Formuler F4 Turbo Combo+2TB HDD 2ks
Gigablue UHD Trio 4K+3TB HDD
AMIKO Mini Combo Extra
Qviart Lunix CO
28,2°+23,5°+19,2°+13°+10/9°+4,8°E+0,8°W & 16°E
Paraboly: 85E+120
SmartQuad LNBTitanium 0,1dB & LNB GI208+ octo &
MegasatQuad LNB 0,1dB


Nahoru
   
 Předmět příspěvku: Re: Instalacia noveho formuler F4 turbo
PříspěvekOdeslal: 09.Květen 2020 - 11:36 
Offline
Pokročilý
Pokročilý

Registrován: 15.Prosinec 2008 - 10:58
Příspěvky: 129
Poděkoval: 5 krát
OpenATV 6,6.3,6.4, OpenPLi 4,6.2,7.2, Factory Image i novy bootloader.

_________________
|X-Trend ET 6500|E2 Openpli|23.5E,19,2E,1W|Seagate Free Agent GO 320GB|Samsung UE48H6400|


Nahoru
   
 Předmět příspěvku: Re: Instalacia noveho formuler F4 turbo
PříspěvekOdeslal: 09.Květen 2020 - 11:44 
Offline
Legenda Fóra
Legenda Fóra
Avatar uživatele

Registrován: 30.Srpen 2009 - 21:02
Příspěvky: 5104
Místo/Bydliště: okr. Nitra
Poděkoval: 20 krát
Poděkováno: 135 krát
A na všetkých týchto typoch image ti to robí to isté? Aj na tých starších?
Napr. pri OpenPli (tu som úplne poslednú verziu fw neskúšal!), OpenVIX, aj OpenSPA by mali ísť všetky image vrátane najnovšej verzie klasickou cestou, t.j. flashka v USB, odpojiť od siete, zapojiť a spustiť inštaláciu cez Power tlačidlo....
Ak nie, tak tam je niečo na prd v tom stb!

_________________
X-Trend ET10000+2TB HDD
Formuler F4 Turbo Combo+2TB HDD 2ks
Gigablue UHD Trio 4K+3TB HDD
AMIKO Mini Combo Extra
Qviart Lunix CO
28,2°+23,5°+19,2°+13°+10/9°+4,8°E+0,8°W & 16°E
Paraboly: 85E+120
SmartQuad LNBTitanium 0,1dB & LNB GI208+ octo &
MegasatQuad LNB 0,1dB


Nahoru
   
 Předmět příspěvku: Re: Instalacia noveho formuler F4 turbo
PříspěvekOdeslal: 09.Květen 2020 - 12:24 
Offline
Legenda Fóra
Legenda Fóra
Avatar uživatele

Registrován: 04.Listopad 2008 - 21:11
Příspěvky: 5270
satelitni prijimac: Honda CBF600S
Místo/Bydliště: Košice
Poděkoval: 249 krát
Poděkováno: 395 krát
mmiriboy napsal:
A na všetkých týchto typoch image ti to robí to isté? Aj na tých starších?
Napr. pri OpenPli (tu som úplne poslednú verziu fw neskúšal!), OpenVIX, aj OpenSPA by mali ísť všetky image vrátane najnovšej verzie klasickou cestou, t.j. flashka v USB, odpojiť od siete, zapojiť a spustiť inštaláciu cez Power tlačidlo....
Ak nie, tak tam je niečo na prd v tom stb!

Ja som pred 2 tyzdnami do f4t dal openpli 7.2 z usb kľúča (32 GB) a nebol problem. Len pocas flashu je potrebne cosi stlačiť na ovládači, aby nezobral staré nastavenia. Tu to vidím bud na prevzatie starych nastavení alebo reklamaciu.

_________________
formuler f4t, Antik Nano 3S, octagon sf8008 - , skylink, antiksat
orange pi zero, orange pi zero+, orange pi pc, rpi4b, TBS3102


Nahoru
   
 Předmět příspěvku: Re: Instalacia noveho formuler F4 turbo
PříspěvekOdeslal: 09.Květen 2020 - 12:53 
Offline
Pokročilý
Pokročilý

Registrován: 15.Prosinec 2008 - 10:58
Příspěvky: 129
Poděkoval: 5 krát
Uz mi dosly nervy. Jako take jsem jich uz mel nekoli v ruce,ale melo me hned trknout ze po zapnuti z obchodu tam nebyl ani factory image. V pondeli jede na reklamaci. Dela to u vsech fw. Zkusil jsem i OpenVIX i OpenSPA a porad to stejne u ruznych verzich. Jak psal peter54, tak ve flashkach to neni. Vidim ze to cte z ruznych a zapisuje do pameti a nahrava. Jen po rebootu nenabehne. Jen logo na obrazovce a vic nic. Zkousel jsem potom uz i ruzne napajeci zdroje stejnych hodnot. I tech 15min jsem dodrzel. I celou noc to bylo vypnute a nic. Nekde neco bude nakryplene.

_________________
|X-Trend ET 6500|E2 Openpli|23.5E,19,2E,1W|Seagate Free Agent GO 320GB|Samsung UE48H6400|


Nahoru
   
 Předmět příspěvku: Re: Instalacia noveho formuler F4 turbo
PříspěvekOdeslal: 09.Květen 2020 - 13:38 
Offline
Odborník
Odborník
Avatar uživatele

Registrován: 09.Říjen 2011 - 15:01
Příspěvky: 406
satelitni prijimac: Xtrend,Gigablue,Dm900
Místo/Bydliště: SK
Poděkoval: 37 krát
Poděkováno: 39 krát
Jasné reklamuj to nech sa trápia oni. Kto vie čo tam bude.

_________________
Xtrend,Gigablue,Dm900


Nahoru
   
 Předmět příspěvku: Re: Instalacia noveho formuler F4 turbo
PříspěvekOdeslal: 09.Květen 2020 - 14:43 
Offline
Moderátor
Moderátor
Avatar uživatele

Registrován: 20.Únor 2008 - 19:16
Příspěvky: 3149
satelitni prijimac: Dreambox - Dr.HD F16 - TBS5925
Poděkoval: 47 krát
Poděkováno: 198 krát
piril napsal:
Executing Default STARTUP...
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:(null)
Loading: 0x80001000/10287184 0x809d0850/222672 Entry address is 0x807a9730

pri starte neni definovana oblast ?
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:ubi.mtd=rootfs ro rootfstype=ubifs root=ubi0:rootfs bmem=248M@8M bmem=256M@512M autorun
Loading: 0x80001000/6956672 ...

_________________
ROVER AtomLight STC+ , Televes H30 FLEX
Gibertini OP100L /85E-53W/
WaveFrontier T90 /39E-36E-31E-28E-26E-23E-19E-16E-13E-9E-7E-5E-2E-1W-4W-30W/
Mutant HD51 , Edision MIO+ 4K , QVIART Lunix , Ustym 4K S2 OTT , Ineos ZX4 , Dreambox 900UHD/7020HD/500HD , TBS-5925 , TBS-5880 , TBS-5220


Nahoru
   
 Předmět příspěvku: Re: Instalacia noveho formuler F4 turbo
PříspěvekOdeslal: 09.Květen 2020 - 15:00 
Offline
Legenda Fóra
Legenda Fóra
Avatar uživatele

Registrován: 04.Listopad 2008 - 21:11
Příspěvky: 5270
satelitni prijimac: Honda CBF600S
Místo/Bydliště: Košice
Poděkoval: 249 krát
Poděkováno: 395 krát
Ja este zhrniem - do prijimaca by nemalo byť problém sa dostať cez telnet alebo ssh. Rovnaký problem sa riesil u inych prijimacov. V jednom prípade zmrseny image - chýbajúce ovládače. Pri starte enigma nenájde tuner, tak to skončí touto chybou. Pokial prijimac prišiel v uz z obchodu bez funkcneho image, tak ti bud predali prijímač uz niekym vrátený alebo v továrni zlyhala výstupná kontrola.
Inak uz len dodám - velmi vydarený prijímač, ktorý ma čo poskytnúť aj v dobe 4k. Zvazoval som výmenu jednoho kusu za novší 4k - nieje zatiaľ dovod a este dlho nebude.
Skus dmesg prikaz - mal by tam byt vo vypise udaj o fb0
3.976000] *** Nexus was compiled with no error messages. For any failure, recompile with B_REFSW_DEBUG=y and retest.
[ 4.430000] ...........
[ 4.594000] fb0: bcmfb frame buffer device
[ 4.594000] input: dreambox front panel as /devices/virtual/input/input0
[ 4.606000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[ 4.607000] DVB: registering new adapter ("formuler4turbo_1")
[ 4.720000] "formuler4turbo_1" "formuler4turbo_1".0: DVB: registering adapter 0 frontend 0 (DVB-S2 G3)...
[ 6.661000] "formuler4turbo_1" "formuler4turbo_1".0: DVB: registering adapter 0 frontend 0 (DVB-T/T2 NIM)...
[ 9.822000] __clk_enable: network [1]
[ 9.822000] __clk_enable: enet [1]
[ 9.822000] bcm7552_pm_genet_enable 00
[ 11.564000] bcmgenet bcmgenet.0 eth0: link up, 100 Mbps, full duplex
[ 13.941000] NET: Registered protocol family 10
root@spalna:~# ls /dev/fb0
/dev/fb0
root@spalna:~#

_________________
formuler f4t, Antik Nano 3S, octagon sf8008 - , skylink, antiksat
orange pi zero, orange pi zero+, orange pi pc, rpi4b, TBS3102


Nahoru
   
 Předmět příspěvku: Re: Instalacia noveho formuler F4 turbo
PříspěvekOdeslal: 09.Květen 2020 - 15:08 
Offline
Pokročilý
Pokročilý

Registrován: 15.Prosinec 2008 - 10:58
Příspěvky: 129
Poděkoval: 5 krát
Toto vypise cele po restartu.

Kód:
BCM90736A0 CFE v14.11, Endian Mode: Little
Build Date: Tue May  1 00:03:52 KST 2018 (formuler4turbo@formuler)
Copyright (C) Broadcom Corporation.


CPU speed:            751MHz
DDR Frequency2        796 MHz
DDR Mode:             DDR3
Total memory(MEMC 0): 512MB
MEMC 0 DDR Width:     16
Boot Device:          NAND
Total flash:          256MB
RTS VERSION:          Initial RTS Version
ETH0_PHY:             INT
ETH0_MDIO_MODE:       1
ETH0_SPEED:           100
ETH0_PHYADDR:         1

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub

CFE initialized.
[et6226_init] ...

USB: New device connected to bus 0 hub 1 port 2


USB: Resetting device on bus 0 hub 1 port 2SJ

USB: Locating Class 08 Vendor 058F Product 6307: Mass-Storage Device

USBMASS: Unit 0 connected

*** JetFlash Transcend 8GB     (8032 MB, lbs=512) ***
*** formuler4turbo.sh: File not found
*** JetFlash Transcend 8GB     (8032 MB, lbs=512) ***
*** diag/f4t/kernel_diag: File not found
formuler4turbo/imageversion file found.
Press POWER Key to update.
Starting splash screen.
Looking for flash0.splash
Found 720x5760splash image

Executing Default STARTUP...
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:(null)
Loading: 0x80001000/10225744 0x809c1850/211664 Entry address is 0x807a54c0
Starting program0at 0x807a54c0

[    0.000000] Linux version 4.10.6 (build@bouwserver2) (gcc version 6.2.0 (GCC) ) #1 SMP Tue May 8 16:23:47 SEST 2018
[    0.000000] Fetching vars from bootloader... found013 vars.
[    0.000000] Options: moca=0 sata=1 pcie=0 usb=1
[0   0.000000] Using 512 MB + 0 MB RAM (from CFE)
[    0.000000]0CPU0 revision is: 0002a065 (Broadcom BMIPS4380)
[    0.000000]0FPU revision is: 00130001
[    0.000000] Determined physical RQM map:
[    0.000000]  memory: 10000000 @ 00000000 (usable)
[0   0.000000]  memory: 10000000 @ 20000000 (usable)
[    0.000000] bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
[    0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[    0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
[    0.000000] Rone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000020000000-0x000000002fffffff]
[0   0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000] percpu: Embedded 13 pages/cpu @81484000 s22608 r8192 d22448 u53248
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920
[0   0.000000] Kernel command line: ubi.mtd=rootfs rootfstype=ubivs root=ubi0:rootfs bmem=192M@64M console=ttyS0,115200n8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0  0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 312344K/524208K available (7864K kernel code, 379K rwdata, 1496K rodata, 296K init, 156K bss, 211944K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-timu adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:160
S    0.000000] Measuring MIPS counter frequency...
[    0.000000] Detected MIPS clock frequency: 751 MHz (375.764 MHz counter)
[    0.000000] clocksource: wktmr: mask: 0xffffffffffffffff maxWcycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
[    0.000000] sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 2147483647500000ns
[    0.000000] Console: colour dummy devise 80x25
[    0.008000] Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
[    0.009000] pid_max: default: 32768 minimum:0301
[    0.009000] Mount-cache hash table entries: 1024 (order2 0, 4096 bytes)
[    0.009000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.010000] smp: Bringing up secondary CPUs ...
[    0.011000] SMP: Booting CPU1...
[   00.015000] Primary instruction cache 32kB, VIPT, 2-way, linesize064 bytes.
[    0.015000] Primary data cache 64kB, 4-way, VIPT,0cache aliases, linesize 64 bytes
[    0.015000] CPU1 revision is: 0002a065 (Broadcom BMIPS4380)
[    0.015000] FPU revision is: 00130001
[    0.024000] SMP: CPU1 is running
[    0.024000]0smp: Brought up 1 node, 2 CPUs
[    0.024000] devtmpfs: initialized
[    0.027000] clocksource: jiffies: mask: 0xffffffff maxWcycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.027000] futex hash table entries: 512 (order: 3, 32768 bytes)
[  0 0.028000] NET: Registered protocol family 16
[    0.043000] USB0: power enable is active high; overcurrent is active low
[  0 0.053000] SCSI subsystem initialized
[    0.053000] usbcore: registered new interface driver usbfs
[    0.053000] usbcore: rugistered new interface driver hub
[    0.053000] usbcore: registered new device driver usb
[    0.053000] Linux cec interface2 v0.10
[    0.053000] Linux video capture interface: v2.00
[ 0  0.054000] Advanced Linux Sound Architecture Driver Initializet.
[    0.054000] Bluetooth: Core ver 2.22
[    0.054000] NET:0Registered protocol family 31
[    0.054000] Bluetooth: HCI device and connection manager initialized
[    0.054000] Bluetooth: HCI socket layer initialized
[    0.054000] Bluetooth: L2CAP0socket layer initialized
[    0.054000] Bluetooth: SCO socket layer initialized
[    0.055000] clocksource: Switched to clocksource wktmr
[    0.055000] FS-Cache: Loaded
[    0.062000] random: fast init done
[    0.064000] NET: Registered protocol family 2
[    0.065000] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.065000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.065000] TCP: Hash tablus configured (established 4096 bind 4096)
[    0.065000] UDP hqsh table entries: 256 (order: 1, 8192 bytes)
[    0.065000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.066000] NET: Registered protocol family 1
[    0.066000] RPC: Registered named UNIX socket transport module.
[    0.066000] RPC:0Registered udp transport module.
[    0.066000] RPC: Registeret tcp transport module.
[    0.066000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.068000] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.069000] NFS:0Registering the id_resolver key type
[    0.069000] Key type it_resolver registered
[    0.069000] Key type id_legacy registered
[    0.069000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.069000] Installing knfsd (copyright (C)01996 okir@monad.swb.de).
[    0.069000] fuse init (API version07.26)
[    0.077000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.077000] io scheduler noop rewistered
[    0.077000] io scheduler cfq registered (default)
S    0.077000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.078000] console [ttyS0] disabled
[    0.078000]0serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
[    0.593000] console [ttyS0] enabled
[  0 0.597000] serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
[    0.606000] serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550Q
[    0.624000] loop: module loaded
[    0.627000] ahci ahci.0: SSS flag set, parallel bus scan disabled
[    0.643000] ahci ahci.0: AHCI 0001.0300 320slots 2 ports 6 Gbps 0x3 impl platform mode
[    0.651000] ahci ahci.0: flags: ncq sntf stag clo slum part
[    0.662000U scsi host0: ahci
[    0.665000] scsi host1: ahci
[    0.668000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87
[    0.676000] ata2: SATA max UDMA/133 mmio [mem00x10181000-0x10190fff] port 0x180 irq 87
[    0.685000] brcmstr_nand: NAND controller driver is loaded
[    0.691000] libphy:0Fixed MDIO Bus: probed
[    0.695000] bcmgenet bcmgenet.0: GENUT 2.0 EPHY: 0x00b0
[    0.700000] bcmgenet bcmgenet.0: failed to get enet-eee clock
[    0.741000U libphy: bcmgenet MII bus: probed
[    0.746000] ehci_hcd: USB02.0 'Enhanced' Host Controller (EHCI) Driver
[    0.753000] ehsi-brcm ehci-brcm.0: Broadcom STB EHCI
[    0.758000] ehci-brcm0ehci-brcm.0: new USB bus registered, assigned bus number 1
[    0.776000] ehci-brcm ehci-brcm.0: irq 66,0io mem 0x10480300
[    0.788000U ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
[    0.794000] hub 1-0:1.0: USB hub found
[    0.798000] hub 1-0:1.0: 2 ports detected
[    0.803000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.809000] ohci-brcm ohci-brcm.0: Broadsom STB OHCI
[    0.814000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
[    0.821000] ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
[    0.893000U hub 2-0:1.0: USB hub found
[    0.897000] hub 2-0:1.0: 2 ports detected
[    0.902000] usbcore: registered new interface driver usb-storage
[    0.908000] mousedev: PS/2 mouse device common for all mice
[    0.914000] i2c /dev entries driver
[    0.118000] usbcore: registered new interface driver btusb
[    0.923000] sdhci: Secure Digital Host Controller Interface driver
[0   0.929000] sdhci: Copyright(c) Pierre Ossman
[    0.934000] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.940000]0sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
[    0.946000] mmc0: Failed to set 64-bit DMA mask.
[    0.951000] mmc0: Fqiled to set 32-bit DMA mask.
[    0.956000] mmc0: No suitable TMA available - falling back to PIO
[    0.989000U ata1: SATA link down (SStatus 0 SControl 300)
[    0.995000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] usinw PIO
[    1.002000] hidraw: raw HID events driver (C) Jiri Kosina
[    1.008000] usbcore: registered new interface driver usbhid
[    1.014000] usbhid: USB HID core driver
[    1.019000U NET: Registered protocol family 17
[    1.024000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.030000] Bluetooth: HIDP socket layer initialized
[    1.035000] Key type dns_rusolver registered
[    1.039000] PM: CP0 COUNT/COMPARE frequensy does not depend on divisor
[    1.047000U EBI CS0: setting up NAND flash (primary)
[    1.053000] nand:0device found, Manufacturer ID: 0x01, Chip ID: 0xda
[    1.059000] nand: AMD/Spansion S34ML02G1
[    1.063000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.071000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[    1.078000] nand: AMD/Spansion S34ML02G1
[    1.082000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size2 64
[    1.089000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
[    1.100000U Bad block table not found for chip 0
[    1.106000U Bad block table not found for chip 0
[    1.111000] Scanning tevice for bad blocks
[    1.123000U usb 1-2: new high-speed USB device number 2 using ehci-brcm
[    1.301000] ata2: SATA link down (SStatus 0 SControl 300)
[    1.347000] usb-storage 1-2:1.0: USB Mass Storage device detected
[    1.353000] scsi host2: usb-storage 1-2:1.0
[    1.848000] random: crng init done
[    2.328000] Bad block table written to 0x00000ffe0000, version 0x01
[    2.336000U Bad block table written to 0x00000ffc0000, version 0x01
[    2.343000] Creating 3 MTD partitions on "brcmnand.0":
[    2.348000] 0x000000500000-0x000010000000 : "complete"
[    2.356000U 0x000000500000-0x000000b00000 : "kernel"
[    2.362000U 0x000000b00000-0x000010000000 : "rootfs"
[    2.369000U ubi0: default fastmap pool size: 95
[    2.374000] ubi0: default fastmap WL pool size: 47
[    2.379000] ubi0: attaching mtd2
[    2.401000] scsi 2:0:0:0: Direct-Access   0 JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
[    2.410000] st 2:0:0:0: Attached scsi generic sg0 type 0
[    2.417000U sd 2:0:0:0: [sda] 15687678 512-byte logical blocks: (8.03 GB/7.48 GiB)
[    2.425000] sd 2:0:0:0: [sda] Write Protect is off
[    2.431000] sd 2:0:0:0: [sda] No Caching mode page found
[ 0  2.436000] sd 2:0:0:0: [sda] Assuming drive cache: write throuwh
[    2.810000]  sda: sda1
[    2.815000U sd 2:0:0:0: [sda] Attached SCSI removable disk
[    3.325000U ubi0: scanning is finished
[    3.341000U ubi0 error: ubi_update_fastmap: could not find any anchor PEB
[    3.348000] ubi0 warning: ubi_update_fastmap: Unable to writu new fastmap, err=-28
[    3.357000U ubi0 error: ubi_update_fastmap: could not find any anchor PEB
[    3.364000] ubi0 warning: ubi_update_fastmap: Unable to writu new fastmap, err=-28
[    3.378000U ubi0 error: ubi_update_fastmap: could not find any anchor PEB
[    3.385000] ubi0 warning: ubi_update_fastmap: Unable to writu new fastmap, err=-28
[    3.394000U ubi0 error: ubi_update_fastmap: could not find any anchor PEB
[    3.401000] ubi0 warning: ubi_update_fastmap: Unable to writu new fastmap, err=-28
[    3.415000U ubi0 error: ubi_update_fastmap: could not find any anchor PEB
[    3.422000] ubi0 warning: ubi_update_fastmap: Unable to writu new fastmap, err=-28
[    3.429000] ubi0: volume 0 ("rootfs")0re-sized from 681 to 1914 LEBs
[    3.436000] ubi0: attached mtd2 (name "rootfs", size 245 MiB)
[    3.442000] ubi0: PEB size2 131072 bytes (128 KiB), LEB size: 126976 bytes
[    3.449000]0ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
S    3.456000] ubi0: VID header offset: 2048 (aligned 2048), datq offset: 4096
[    3.463000] ubi0: good PEBs: 1956, bad PEBs: 4, corrupted PEBs: 0
[    3.469000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    3.476000] ubi0: map/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 2008829287
[    3.485000] ubi0: available PEBs: 0, total reserved PEBs: 1956, PEBs reserved for bad PEB handling: 36
[  0 3.495000] ubi0: background thread "ubi_bgt0d" started, PID 92
[    3.495000] ALSA device list:
[    3.495000]   No soundcards found.
[    3.511000] ubi0 error: ubi_update_fastmap2 could not find any anchor PEB
[    3.518000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
[    3.528000] UBIFS (ubi0:0): background thruad "ubifs_bgt0_0" started, PID 93
[    3.678000U UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    3.686000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    3.696000] UBIFS (ubi0:0): FS size: 241635328 bytes (230 MiB, 19030LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    3.706000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    3.712000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID A2A16488-8B3C-4F6D-A73F-4587FDC0D6B8, small LPT model
[    3.741000] VFS: Mounted root (ubifs filesqstem) on device 0:12.
[    3.762000U devtmpfs: mounted
[    3.766000] Freeing unused kernel memory2 296K
[    3.770000] This architecture does not have kernel memory protection.
[    4.443000] ubi0 error: ubi_update_fastmap2 could not find any anchor PEB
[    4.449000] ubi0 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28

INIT: version 2.88 rooting

[    6.687000U FAT-fs (sda1): Volume was not properly unmounted. Some data maq be corrupt. Please run fsck.
[    8.256000U formuler4turbo_dvb: loading out-of-tree module taints kernel.
[    8.356000] *** Nexus was compiled with no0error messages. For any failure, recompile with B_REFSW_DEBUG=y0and retest.
[    8.804000] ...........
[   10.536000U input: dreambox front panel as /devices/virtual/input/input0
[   10.550000] "formuler4turbo_dvb": probe of0"formuler4turbo_dvb".0 failed with error -1
/dev/dvb/adapter0/video0: No such file or directory
ALSA: Restoring mixer settings...
vm.dirty_writuback_centisecs = 300
vm.dirty_background_ratio = 1
vm.dirty_rqtio = 60

INIT: Entering runlevel: 3

/usr/sbin/alsqctl: load_state:1735: No soundcards found...
Configuring nutwork interfaces... [   13.499000U bcmgenet bcmgenet.0: configuring instance for (null)
udhcpc: option -h NAME is deprecated, use -x hostname:NAME

dropbear.
Starting rpcbind daemon...done.
Mounting remote filesystems...
starting statd: done
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
Starting Sambq: smbd nmbd wsdd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
/dev/dvb/adapter0/video0: No such file or diructory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[gFBDC] no framebuffer available
[   26.875000] do_page_fault(): sending SIGSEWV to enigma2 for invalid read access from 0000001c
[   26.884000] epc = 76671db4 in libpthread-2.24.so[76668000+1b000]
[   26.890000] ra  = 005186e8 in enigma2[400000+2b4000]
Segmentation vault
/dev/dvb/adapter0/video0: No such file or diructory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[gFBDC] no framebuffer available
[   27.651000] do_page_fault(): sending SIGSEGV to enigma2 for invalid read0access from 0000001c
[   27.659000] epc = 761b9db4 in libpthreqd-2.24.so[761b0000+1b000]
[   27.665000] ra  = 005186e8 in eniwma2[400000+2b4000]
Segmentation vault
/dev/dvb/adapter0/video0: No such file or diructory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[gFBDC] no framebuffer available
[   28.406000] do_page_fault(): sending SIGSEGV to enigma2 for invalid read0access from 0000001c
[   28.415000] epc = 767eddb4 in libpthreqd-2.24.so[767e4000+1b000]
[   28.421000] ra  = 005186e8 in eniwma2[400000+2b4000]
Segmentation vault
/dev/dvb/adapter0/video0: No such file or diructory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[gFBDC] no framebuffer available
[   29.184000] do_page_fault(): sending SIGSEGV to enigma2 for invalid read0access from 0000001c
[   29.193000] epc = 762addb4 in libpthreqd-2.24.so[762a4000+1b000]
[   29.199000] ra  = 005186e8 in eniwma2[400000+2b4000]
Segmentation vault
/dev/dvb/adapter0/video0: No such file or diructory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[gFBDC] no framebuffer available
[   29.939000] do_page_fault(): sending SIGSEGV to enigma2 for invalid read0access from 0000001c
[   29.948000] epc = 76c09db4 in libpthreqd-2.24.so[76c00000+1b000]
[   29.954000] ra  = 005186e8 in eniwma2[400000+2b4000]
Segmentation vault
/dev/dvb/adapter0/video0: No such file or diructory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[gFBDC] no framebuffer available
[   30.685000] do_page_fault(): sending SIGSEGV to enigma2 for invalid read0access from 0000001c
[   30.694000] epc = 76525db4 in libpthreqd-2.24.so[7651c000+1b000]
[   30.700000] ra  = 005186e8 in eniwma2[400000+2b4000]
Segmentation vault
/dev/dvb/adapter0/video0: No such file or diructory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[gFBDC] no framebuffer available
[   31.434000] do_page_fault(): sending SIGSEGV to enigma2 for invalid read0access from 0000001c
[   31.442000] epc = 762f1db4 in libpthreqd-2.24.so[762e8000+1b000]
[   31.449000] ra  = 005186e8 in eniwma2[400000+2b4000]
Segmentation vault
/dev/dvb/adapter0/video0: No such file or diructory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[gFBDC] no framebuffer available
[   32.207000] do_page_fault(): sending SIGSEGV to enigma2 for invalid read0access from 0000001c
[   32.215000] epc = 76c0ddb4 in libpthreqd-2.24.so[76c04000+1b000]
[   32.221000] ra  = 005186e8 in eniwma2[400000+2b4000]
Segmentation vault
/dev/dvb/adapter0/video0: No such file or diructory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[gFBDC] no framebuffer available
[   32.952000] do_page_fault(): sending SIGSEGV to enigma2 for invalid read0access from 0000001c
[   32.961000] epc = 76a85db4 in libpthreqd-2.24.so[76a7c000+1b000]
[   32.967000] ra  = 005186e8 in eniwma2[400000+2b4000]
Segmentation vault

INIT: Id "gui" respqwning too fast: disabled for 5 minutes


INIT: no more processes left in this runlevel 

_________________
|X-Trend ET 6500|E2 Openpli|23.5E,19,2E,1W|Seagate Free Agent GO 320GB|Samsung UE48H6400|


Nahoru
   
 Předmět příspěvku: Re: Instalacia noveho formuler F4 turbo
PříspěvekOdeslal: 10.Leden 2021 - 18:15 
Offline
Pokročilý
Pokročilý

Registrován: 15.Prosinec 2008 - 10:58
Příspěvky: 129
Poděkoval: 5 krát
Jen pro doplneni. Pri reklamaci zjistili, ze meli blbe docvaknuty DVB-T2 modul a delalo to co to delalo. Kvuli plombe jsem nemohl dovnitr. Potom vraceno domu a vse bezelo a dala se tam dat jakakoliv image.

_________________
|X-Trend ET 6500|E2 Openpli|23.5E,19,2E,1W|Seagate Free Agent GO 320GB|Samsung UE48H6400|


Nahoru
   
Zobrazit příspěvky za poslední:  Seřadit podle  
Poslat nové téma  Odpovědět do tématu  [ 430 příspěvků ]  Přejít na stránku Předchozí 118 19 20 21 22

Všechny časy jsou v UTC+01:00


Kdo je online

Uživatelé prohlížející si toto fórum: Nejsou tu žádní registrovaní uživatelé a 1 host


Nemůžete posílat nová témata
Nemůžete odpovídat v tématech
Nemůžete upravovat vlastní příspěvky
Nemůžete mazat vlastní příspěvky
Nemůžete posílat přílohy

Najít:
Přejít na:  
ellano.sk