UPC Direct (Freesat) Nagravision karta v prijimaci VU+ Solo 4K - OScam alebo gbox - nic mi neide :(

[mcmiazga]

Ahojte.

Snazim sa uz par hodin rozbehat UPC Direct staru kartu (predpokladam ze Nagravision), no zial bez uspechu.

Nechcem ziaden sharing, ide mi len o to aby som vedel pozerat a nahravat programy, nemusim pouzit ani druhy tuner.

Skusal som OScam 1.20 rev: 11424 na VTi 13.0.11.

Dole je prilozeny log. Neviem si s tym uz dat rady, uz som skusal tolko konfuguracii, no ziadna nie je pre Nagra, vsetko je pre Irdeto. Prosim o help!

/etc/tuxbox/config/oscam.conf

Kód: Vybrat vše

[global]
logfile = /dev/tty
nice = -1
preferlocalcards = 1

[cache]

[cccam]
port = 12000
nodeid = 7F02E4421061144C
version = 2.3.0
reshare = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = dvbapiau
boxtype = dreambox

[webif]
httpport = 8888
httprefresh = 10
httppollrefresh = 10
httphideidleclients = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255

/etc/tuxbox/config/oscam.dvbapi

Kód: Vybrat vše

P: 0D97 1
P: 1815
P: 0D70
P: 0624

/etc/tuxbox/config/oscam.server

Kód: Vybrat vše

[reader]
label = freesat
description = NaGrAvIsIoN
protocol = internal
device = /dev/sci0
caid = 0D97
force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 2700
group = 1
emmcache = 1,3,2,0

/etc/tuxbox/config/oscam.user

Kód: Vybrat vše

[account]
user = dvbapiau
pwd =
group = 1,2,3,4,5
uniq = 3
au = 1

Log z webu

Kód: Vybrat vše

2018/08/22 18:40:09 00000000 s     (main) System name    = Linux
2018/08/22 18:40:09 00000000 s     (main) Host name      = vusolo4k
2018/08/22 18:40:09 00000000 s     (main) Release        = 3.14.28-1.8
2018/08/22 18:40:09 00000000 s     (main) Version        = #1 SMP Tue Apr 10 12:18:54 CEST 2018
2018/08/22 18:40:09 00000000 s     (main) Machine        = armv7l
2018/08/22 18:40:09 00000000 s     (main) Stb model      = dm8000
2018/08/22 18:40:09 00000000 s     (main) Stb vumodel    = vusolo4k
2018/08/22 18:40:09 00000000 s     (main) Stb boxtype    = vusolo4k
2018/08/22 18:40:09 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1573
2018/08/22 18:40:09 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/08/22 18:40:09 00000000 s     (main) signal handling initialized
2018/08/22 18:40:09 00000000 s      (net) cccam: initialized (fd=4, port=12000)
2018/08/22 18:40:09 00000000 s   (reader) freesat [internal] creating thread for device /dev/sci0
2018/08/22 18:40:09 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/08/22 18:40:09 00000000 s     (main) waiting for local card init
2018/08/22 18:40:09 13762D4D r   (reader) freesat [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2018/08/22 18:40:09 13762D4D r   (reader) freesat [internal] Reader sci internal, detected box type: vusolo4k
2018/08/22 18:40:09 13762D4D r   (reader) freesat [internal] card detected
2018/08/22 18:40:09 42BD60AD h    (webif) webif: decompressed 177583 bytes back into 437728 bytes
2018/08/22 18:40:09 42BD60AD h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2018/08/22 18:40:10 13762D4D r   (reader) freesat [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12 
2018/08/22 18:40:10 13762D4D r   (reader) freesat [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/22 18:40:10 13762D4D r   (reader) freesat [internal] Calculated work ETU is 7.11 us reader mhz = 450
2018/08/22 18:40:13 13762D4D r   (reader) freesat [internal] Buffers readed  0 bytes total time_us 3095648
2018/08/22 18:40:13 13762D4D r   (reader) freesat [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2018/08/22 18:40:13 13762D4D r   (reader) freesat [internal] Card responded ok for ifsd request of 251
2018/08/22 18:40:14 13762D4D r   (reader) freesat [internal] detect native nagra card
2018/08/22 18:40:15 13762D4D r   (reader) freesat [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2018/08/22 18:40:15 13762D4D r   (reader) freesat [internal] card system not supported
2018/08/22 18:40:15 13762D4D r   (reader) freesat [internal] Normal mode failed, reverting to Deprecated Mode
2018/08/22 18:40:16 13762D4D r   (reader) freesat [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12 
2018/08/22 18:40:16 13762D4D r   (reader) freesat [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/22 18:40:16 13762D4D r   (reader) freesat [internal] Calculated work ETU is 82.67 us reader mhz = 450
2018/08/22 18:40:19 13762D4D r   (reader) freesat [internal] Buffers readed  0 bytes total time_us 3095526
2018/08/22 18:40:19 13762D4D r   (reader) freesat [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2018/08/22 18:40:23 13762D4D r   (reader) freesat [internal] Warning: Card returned error on setting ifsd value to 251
2018/08/22 18:40:24 13762D4D r   (reader) freesat [internal] detect native nagra card
2018/08/22 18:40:27 13762D4D r   (reader) freesat [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2018/08/22 18:40:30 13762D4D r   (reader) freesat [internal] T1 Resync command error, trying to reactivate!
2018/08/22 18:40:31 13762D4D r   (reader) freesat [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12 
2018/08/22 18:40:31 13762D4D r   (reader) freesat [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/08/22 18:40:31 13762D4D r   (reader) freesat [internal] Calculated work ETU is 7.11 us reader mhz = 450
2018/08/22 18:40:34 13762D4D r   (reader) freesat [internal] Buffers readed  0 bytes total time_us 3095685
2018/08/22 18:40:35 13762D4D r   (reader) freesat [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2018/08/22 18:40:35 13762D4D r   (reader) freesat [internal] Card responded ok for ifsd request of 251
2018/08/22 18:40:35 13762D4D r   (reader) freesat [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2018/08/22 18:40:35 13762D4D r   (reader) freesat [internal] card system not supported
2018/08/22 18:40:35 13762D4D r   (reader) freesat [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2018/08/22 18:40:35 13762D4D r   (reader) freesat [internal] card initializing error
2018/08/22 18:40:36 00000000 s     (main) init for all local cards done
2018/08/22 18:40:36 00000000 s (anticasc) anti cascading disabled
2018/08/22 18:40:36 0717E571 c   (client) plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2018/08/22 18:40:36 0717E571 c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2018/08/22 18:40:36 0717E571 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/08/22 18:40:39 0717E571 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1815 ECM_PID: 13B6 PROVID: 000000 
2018/08/22 18:40:39 0717E571 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0B02 ECM_PID: 160E PROVID: 000000 
2018/08/22 18:40:39 0717E571 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0D97 ECM_PID: 173A PROVID: 000000 
2018/08/22 18:40:39 0717E571 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0653 ECM_PID: 1866 PROVID: 000000 
2018/08/22 18:40:39 0717E571 c   (dvbapi) Demuxer 0 found 4 ECMpids and 3 STREAMpids in caPMT
2018/08/22 18:40:39 0717E571 c   (dvbapi) Demuxer 0 impossible to descramble PID 2 CAID 0D97 PROVID 000000 ECMPID 173A PMTPID 015E (NO MATCHING READER)
2018/08/22 18:40:39 0717E571 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 3 disabled ecmpids!
2018/08/22 18:40:39 0717E571 c   (dvbapi) Demuxer 0 impossible to descramble PID 2 CAID 0D97 PROVID 000000 ECMPID 173A PMTPID 015E (NO MATCHING READER)
2018/08/22 18:40:39 0717E571 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 3 disabled ecmpids!

[alben]

A data z prijimaca mas kde?

[avatar99]

čtečku máš nastavenou na irdeto tak ji nastav na nagru a dvbapi taky

[Warder]

Co ti vravi Box & RSA Key ........ ?

[dlhe_pole]

čtečku máš nastavenou na irdeto tak ji nastav na nagru a dvbapi taky

no bez boxkey a rsa si tam moze nastavit aj staru ****** a nepojde mu to, pretoze naozaj ma DNASP142 RevG06 kartu

[mcmiazga]

A data z prijimaca mas kde?

Netusim co to je

[mcmiazga]

čtečku máš nastavenou na irdeto tak ji nastav na nagru a dvbapi taky

http://www.streamboard.tv/wiki/OSCam/en ... rce_irdeto

Staci odmazat:
force_irdeto = 1

a pridat:
nagra_read = 1 # read all records with expired rights

Alebo ako to spravim?

[mcmiazga]

čtečku máš nastavenou na irdeto tak ji nastav na nagru a dvbapi taky

no bez boxkey a rsa si tam moze nastavit aj staru ****** a nepojde mu to, pretoze naozaj ma DNASP142 RevG06 kartu

Asi myslis tieto parametre:
n3_rsakey =
n3_boxkey =

Netusim co tam mam zadat lebo ujo google mi moc nepomohol a tu som sa to snazil najst, no problem je to ze je to Nagra...

[dlhe_pole]

čtečku máš nastavenou na irdeto tak ji nastav na nagru a dvbapi taky

no bez boxkey a rsa si tam moze nastavit aj staru ****** a nepojde mu to, pretoze naozaj ma DNASP142 RevG06 kartu

Asi myslis tieto parametre:
n3_rsakey =
n3_boxkey =

Netusim co tam mam zadat lebo ujo google mi moc nepomohol a tu som sa to snazil najst, no problem je to ze je to Nagra...

no data z tvojeho boxu na ktory mas naparovanu kartu .. takze supom niekomu dat urobit flashdump a decrypt dumpu

[mcmiazga]

Dikez moc, prave som pochopil ako to funguje.

Potrebujem teda RSA a BOX kluce aby som "odomkol" kartu. Mam na spojazdnenie boxu cca tyzden. Vydumpovat prijimac sice asi nebude velky problem a urcite su aj tooly na vycitanie dumpov, no podla mna s Irdeto kartou take problemy nebudu.

1. Ak by som vymenil kartu za Irdeto, musel by mi dat freeSAT novy prijimac?
2. Je s Irdeto kartami rovnaky problem? (parovanie prijimac, karta)
3. Vie freeSAT vymenit kartu rychlo? (na pockanie)

[dlhe_pole]

Dikez moc, prave som pochopil ako to funguje.

Potrebujem teda RSA a BOX kluce aby som "odomkol" kartu. Mam na spojazdnenie boxu cca tyzden. Vydumpovat prijimac sice asi nebude velky problem a urcite su aj tooly na vycitanie dumpov, no podla mna s Irdeto kartou take problemy nebudu.

1. Ak by som vymenil kartu za Irdeto, musel by mi dat freeSAT novy prijimac?
2. Je s Irdeto kartami rovnaky problem? (parovanie prijimac, karta)
3. Vie freeSAT vymenit kartu rychlo? (na pockanie)

kontaktuj zakaznicku linku freesatu a dozvies sa vsetko

BTW: a co sa tyka dumpu a decryptu tym bych si taky isty nebol.. leda ze by si mal programator s paticami, a bga reworkstation.

BTW2: co sa mna tyka ja by som staru nmagru nemenil za ziadne stupid irdeto/ice

[mcmiazga]

Myslel som ze to pojde vydumpovat cez RS232, no toto vyzera na teplovzdusnu pajku s nastavcom na chipy co az taky problem nie je, no problem vidim v programatore Cize uz som ticho.

BTW mrzi ma ze presne koli takym kretenskym blokaciam mi pripada jednoduchsie zaplatit si od cinanov 5 eurovy balicek na rok

[dlhe_pole]

Myslel som ze to pojde vydumpovat cez RS232, no toto vyzera na teplovzdusnu pajku s nastavcom na chipy co az taky problem nie je, no problem vidim v programatore Cize uz som ticho.

BTW mrzi ma ze presne koli takym kretenskym blokaciam mi pripada jednoduchsie zaplatit si od cinanov 5 eurovy balicek na rok

to je normalna funkcia nagry... aj v irdete sa mozna dockas uniblocku a potom ti tvoji 5 eurovy tínankovia budu out

BTW: a na rs232 kludne zabudni, pise sa rok 2018 a nie 1991