Softcam feed -OpenXTA a Open ATV

[Pastoman]

Pre nainštalovanie softcamu z E2 Open XTA a Open ATV treba najskôr nainštalovať softcam feed. Po nainštalovaní sa Vám zobrazí v inčtalačnom feede enigmy menu/moduly/ zelene tlač. aj feed pre softcamy.
OpenXTA

openxta-feed-mipsel_1.0_all.ipk

OpenATV

softcam-feed-mipsel_1.0_all.ipk

Nediskutovať - sekcia slúži výhradne pre download !

[davidas]

OpenATV Softcam Feed 2.0 (2017)

Installation:
Copy the softcam-feed-mipsel_x.x_all.ipk to "TMP" on your STB via FTP,
Set Now on your STB press the Blue botton on the remote and go to Plugins » IPK Installer » Memory /tmp » Intall Extensions » Select:
softcam-feed-mipsel_x.x_all.ipk
and press the Green Button,
Now go to the start, press the Blue Button and now you have the Softcam Panel were you can install and manage your softcams,
Have fun.

[mmiriboy]

Prečo OpenATV 5.2? Nemal by to byť OpenATV 6.2? Si sa pomýlil?
Neviem, či konkrétne tento odkaz funguje, ale teraz cez víkend som preinštaloval môj Xtrend na OpenATV 6.3 a bezproblémovo som použil takúto verziu "2.0" stiahnutú z netu. Všetko fungovalo na prvý šup.
Inak toto je vlákno, v ktorom sa nemá diskutovať!!!

Doplnok:
Tu je môj ipk balíček:

softcam-feed-universal_2.0_all.ipk

Apropo! Tento inštalačný súbor mám "odložený" na interom HDD v stb, t.j. V prípade potreby-vždy dostupný. A cez PC ho nemám dôvod otvárať!

[minestra]

!!! softcam-feed-universal_3.0_all.ipk = softcam-feed-universal_2.0_all.ipk !!!

[9000peter]

Softcam Feed for OpenATV (as of May 2019)


Installation instructions
Package name: softcam-feed-universal_6.Plus_all.ipk
Name: softcam-feed-universal 6 Plus
Supported Images: openATV Images 6.1 or newer, min release : 2019.05.01
Older Images are not supported!

Changes:
-Added support for OpenPli Cam Starter (/etc/initd)
-Fixed download issues
-There is no longer a restart required after installation

Installation:
1) Copy softcam-feed-universal_6.Plus_all.ipk to a USB stick
2) Connect the USB stick to your E2 receiver and follow the instructions.
3) Select the Softcam feed with "OK" and press the green button to start the installation
4) Open the plugin browser and press green to install a Softcam
5) After installation, press Menu and open Info Panel check for Softcam-Setup
5.1) After the Gui restart you will find it under Decryption and Parental Control
6) Using Softcam Setup you can take control which installed softcam is used as Softcam or Cardserver

Configure your Softcam
The location for config files moved to enigma2 image default - /etc/tuxbox/config/ .

The old location /usr/keys/ is no longer supported.