AB-FÓRUM - Satelitné fórum (Satelity, DVB-T/T2, DVB-C, IPTV)

Enhanced Movie Center (EMC) V1.1.0
Main Features
MovieList:
- Fast operation compared to the original E2 MovieList
- Full directory support
- More control over the movie files (move, delete, dir create, empty dir delete)
- Multiselection (pressing the video-button on a movie) for all available operations (delete, move and playlist)
- Files can be moved or renamed during playback / recording (Linux filesystem feature)
- Files can be deleted while being played (playback will be stopped or file is removed from playlist)
- Ongoing recording is shown in the movie list
- Recording can be stopped via the movie list
- Trashcan option (if you don't like it, put "days remain" to 0 and "trashcan hide"=yes)
- File operations done in the background (currently 3 shell execution unit instances, can be scaled up if required)
- Files being moved across mount points e.g. from internal HDD to an NFS/CIFS NAS share (or vice versa) do not block the GUI
Other features:
- Allows usage of different GUI and EPG languages without messing up the EPG
- Automatic cleanup of done-timers
- Automatic daily restarting of Enigma (prevents device crashing in heavy usage)
- Possibility to speedup the remote control key input

MovieList Controls
- Cursor keys: navigate list normally
- Info: standard Enigma EventView
- Menu: pops up the MovieSelectionMenu
- TV-button: reload current directory
- VIDEO-button: Select / deselect files for multiselection
- TEXT-button: Multi-selection *toggle* begin / end
- OK: play current movie selection / playlist
- RED: delete selected movies (permanently if "days to remain in trashcan"==0)
- GREEN: Alpha sort / date sort toggle
- YELLOW: Move currently selected movies (LocationBox opened if cursor not on top a directory)
- BLUE: Movie home / Play last (configurable)

FAQ
Q: What is the "cifs* files operation" setting?
A: On Samba CIFS filesystem Linux creates "cifs"* (randomly numbered e.g. cifs7645) files when files that are being used by some process get deleted by some other process. For some reason these files are not deleted by the filesystem when the first process using the file finally releases it. I added this option when I was using recording over a Samba CIFS mount. This way I didn't have to worry about these grabage files left on the drive. If you're not using a CIFS mount you can ignore this setting as it will have no effect.

Q: What is the "cursor to newest" setting?
A: The "cursor to newest" settings simply move the cursor on top of the newest recording when the list is opened (from tv mode or playback mode). By setting on the reversed list order this effect will probably be more visible.

Enhanced Movie Center (EMC) V.2.0.1
Changelog v.2.0.1

* Bug fix: When you start recording and subsequent end there was a crash if there is a "Last played" was heading.
* Fix: DVD player will now only be required if an appropriate format to be played.
* Bug fix: If a symlink in the directory to the target no longer exists, or could not be reached,'s not been listed.
* Fix: DVD Startup Problem solved
* Bug fix: The [TEXT] button on the DVD subtitles can now be selected.
* Bug fix: open the movie player (not DVD) [teletext button] now the video text, [Menu] key, the main menu, E2, [radio button] menu extensions E2
* Bug fix: Chapter skip / ChapterZap is now default is 0 and it is checked whether the field is empty. (Caused a crash on any input)
* Bug fix: "Oozoon Image" EMCMediaCenter (Player) fixed, press Up / Down now open the movie list (as in the image DMM).
* Change: If a movie is playing, in which "looked ready" to the progress already above the area, it is played from the beginning and Lastplayed is set as a marker. (Previously, no marker has been set)
* Change: Press [Green] switching between pillarbox, panscan, and "just scale" is now available in DVD Player
* Change: The EMC setup appears with the name "Setup". Thus, always clear whether the setup or the EMC is calling the extension is visible in the menu.
* Change: EMC icon back into the main folder of EMC moved so that the icon is also displayed in GP3.
* Change: HD Skin corrected. And also equipped with a yellow progress bar in the player (as it was in SD and XD Skin already).
* New: SeekBar now works at EMC player (even if the SeekBar quite a hack, we got it up This was so often desired..)
* New: Description is the duration of the scroll button until the release read. (Bring a much smoother scrolling)

Enhanced Movie Center (EMC) V.3.0.0beta708 OE 2.0 by Coolman, Betonme & Swiss-MAD

Changelog (nur das wichtigste)

Einige neuerungen in dieser Version, auch wenn die Liste noch nicht komplett ist:
- Der EMC-MoviePlayer hat jetzt einen eigenen OLED-Screen. Die XML ist wie die anderen Skin's im EMC Skinverzeichnis zu finden. Diese XML ist nur mal quick and dirty gemacht, damit es erst mal funktioniert.
- Dateinamen mit "backsticks" ( ` ) können nun verschoben, kopiert und gelöscht werden.
- Direktes Löschen verwendet nun die die E2 routine. Diese begrenzt den Datentransfer um aussetzer in laufenden Aufnahmen zu vermeiden.
- Sortierung nun auch nach Fortschritsanzeige (Progressbar in der MovieListe).
- Umbenennen von Filmtiteln und Verzeichnisse geht nun auch ohne "MovieRetitle" Plugin. Verzeichnisse können auch umbenannt werden. Mehrfach umbenennen auch bei Mehrfachselektion.
- Trahscan cleanup sollte nun das leeren unterlassen wenn im Setup versehentlich der MovieHome Pfad als Trashcan Pfad angegeben wird, auch wenn MovieHome in einem Unterverzeichnis vom Trashcan Pfad liegt.
- Auf die Taste [Lange-Info] kann nun im Setup anstelle ipdb-Plugins auch das "TMDb Info" gelegt werden.

Bugfix: Cutlist Marker sollten nicht mehr gelöscht werden.

Rev.708
Bugfix: Alle zugehörigen Files werden beim löschen nun mit gelöscht.
Bugfix: Cuts sollten nun auch wieder gespeichert werden wenn man während des abspielens direkt einen neuen Film abspielt.
Bugfix: Trashcan taucht auf wenn man aus "Latest Recordings" mit ".." zurückgeht.
Bugfix: Zap to live tv after playing a record until eof

EnhancedMovieCenter (EMC) - CZ&SK patch by petrkl12

1. opravena práce s CZ a SK znaky
2. opraveno načítání .eit a .meta files, pokud je v Setupu zakázáno je načítat
3. doplněna možnost volat CSFD včetně vyhledání obalů (Covers) z CSFD. Vše je nutné povolit v Setupu pluginu a dále vybrat v Nastavení při spuštění volby Covers. CSFD jako zdroj lze zvolit jak pro jednotlivá vyhledání, tak i pro hromadné vyhledávání. Úspěšnost při vyhledávání je velmi vysoká Obal se potom zobrazuje při prohlížení vašich filmů a nahrávek - musí to ale podporovat váš skin (default EMC a poslední verze HDG to umí) a zároveň musí být zapnutá volba Zobrazovat Covers v Nastavení EMC.

Plugin musíte mít nainstalován, jde pouze o patch. Soubory v příloze nakopírujte do adresáře EnhancedMovieCenter, nastavte atributy na 644 a restartujte GUI

Díky petrkl12

Enhanced Movie Center (EMC) V.3.6.7beta20130104 OE 2.0 by Coolman, Betonme & Swiss-MAD

Popis snad dodám později.
Jedná se o verzi s korektním zobravováním českých znaků v epg a s čj n nastavení...

EMC 3.7.0 beta

Oprava sťahovania posterov z CSFD.

Rozbaliť a súbory prekopírovať do usr/lib/enigma2/python/plugins/Extensions/EnhancedMovieCenter
Potom restart GUI.

Díky petrkl12

EMC 3.7.3 beta

Enhanced Movie Center (EMC) V.3.7.4beta20131015
Changelog:

• update german translation
• added option to switch off showing fallback cover ("No cover found")
• Fix "KEY_LEFT" & "KEY_RIGHT" double press on regular player
• replaced Menu screen with EMCMenu screen
  (The old one is no longer working on OE2.0 Images, as the Main Menu screens have replace the old Menu screen.)
• ignore phrases for MovieInfo-Lookup which are encapsulated in (*)

EMC 4.0. Beta

Rucna instalacia z githubu
Zdroj https://github.com/betonme/e2openplugin ... ovieCenter
stiahnite si zip (vpravo Download ZIP)
prekopirujte/prepiste subory na vu
kde sa co ma nakopirovat je napisane v subore Makefile.am
installdir = /usr/lib/enigma2/....
vsetky subory maju atribut 644, adresare 755
a nakoniec restart

Verzia EMC je v subore EnhancedMovieCenter.py, tu je historia
EMCVersion = "git20151116"
EMCVersion = "git20151003"
EMCVersion = "V4.0.0beta20150525"
EMCVersion = "V4.0.0beta20150413"
EMCVersion = "V4.0.0beta20150405"
EMCVersion = "V3.7.4beta20131015"

Enhanced Movie Center 4.0git 20151126
- Fixed not available new picon renderer on blackhole 2.17
- raised git date
- Update EitSupport.py - Bugfixing Eit alternative languages
- Eit: Show all descriptions if the preferred is not available
- Language code must be compared lower case
- EIT uses ISO639-3 and the system language is specified in ISO639-2
- [MovieCenter] set same y-position for folder name as movie name in movie list
- added options for hiding miniTV
- [MovieCenter.py] caching supports fast switching (on/off) of hidden dirsin preparation of additional parental control features
- [MovieCenter] fix hoizontal position from movie name and date in movie list
- [MovieCenter] add skin attribute for movie list (values are exist, but not skin attribut)
- modify filter for 'latest recordings' from file **** data change to last file content change date
- Update de.po
- [plugin.py] fix for translation
- added 'Movie home at start' option 'after standby'

verzia z githubu k 6.11.2016

vzdy aktualna skompilovana ipk verzia sa da stiahnut z feedu newenigma
http://feed.newnigma2.to/unstable/4.0/mips32el/

-na feed-servery imagu "NewEnigma2" sa zmenila cesta k suboru... lepsie je podla mna vyuzit korenovu zlozku feed servera (browsovatelnu cez HTTP) a preklikat sa k suboru... daily build verzia neustale meni svoj nazov suboru (podla datumu 'buildu' takze priamy odkaz uvadzat by bola blbost):
-korenova zlozka pre image samotne: http://feed.newnigma2.to/
-korenova zlozka pre balicky enigma2.0/mipsel: http://feed.newnigma2.to/daily/oe2.0/ipk/mips32el/
-instalacny balicek EMC v1.0 tam najdete pod nasledujucim nazvom: "enigma2-plugin-extensions-enhancedmoviecenter_1.0gitAKTUALNYDATUM-r1_mips32el.ipk"
-posledna aktualna build verzia v case pisania tohto prispevku je dolu v prilohe (ako kopia)

-prikladam k stiahnutiu v4.0 z feed-servera OpenATV 6.0, ktora je sice urcena majoritne pre OpenATV 6.0 system, ale hadam bude fungovat aj v inych

-podla vyssie uvedeneho navodu "Rucna instalacia z GitHubu" od uzivatela kofolak si mozte z githubu stiahnut a "nainstalovat" v3.x
-podla historie verzii by tam mala byt aktualne k dnesnemu dnu nejaka v3.7-beta

//////// EDIT 21.4.2017 :
- vymena Enhanced Movie Center v4.0 v prilohe mojho prispevku, za novsiu verziu